1. General description

The NXB0104-Q100 is a 4-bit, dual supply translating transceiver with auto direction sensing, that

enables bidirectional voltage level translation. It features two 4-bit input-output ports (An and Bn),

one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at

any voltage between 1.2 V and 3.6 V and VCC(B) can be supplied at any voltage between 1.65 V

and 5.5 V, making the device suitable for translating between any of the low voltage nodes (1.2 V,

1.5 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are

referenced to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance

OFF-state. This device is fully specified for partial power-down applications using IOFF. The IOFF

circuitry disables the output, preventing the damaging backflow current through the device when it

is powered down.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100

(Grade 1) and is suitable for use in automotive applications.

2. Features and benefits

• Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

• Wide supply voltage range:

• VCC(A): 1.2 V to 3.6 V and VCC(B): 1.65 V to 5.5 V

• IOFF circuitry provides partial Power-down mode operation

• Inputs accept voltages up to 5.5 V

• ESD protection:

• HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2.5 kV for A port

• HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 15 kV for B port

• CDM: ANSI/ESDA/Jedec JS-002 Class C3 exceeds 1.5 kV

• MIL-STD-883, method 3015 Class 2 exceeds 2.5 kV for A port

• MIL-STD-883, method 3015 Class 3B exceeds 15 kV for B port

• Latch-up performance exceeds 100 mA per JESD 78B Class II

• Multiple package options

• DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of

solder joints