1. General description

The 74HC253-Q100; 74HCT253-Q100 is a dual 4-bit multiplexer, each with four binary inputs

(nI0 to nI3), an output enable input (nOE) and shared select inputs (S0 and S1). One of the four

binary inputs is selected by the select inputs and routed to the output nY. A HIGH on nOE causes

the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the

use of current limiting resistors to interface inputs to voltages in excess of VCC.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100

(Grade 1) and is suitable for use in automotive applications.

2. Features and benefits

• Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

• Non-inverting data path

• 3-state outputs interface directly with system bus

• Common select inputs

• Separate output enable inputs

• Wide supply voltage range from 2.0 V to 6.0 V

• Input levels:

• For 74HC253-Q100: CMOS level

• For 74HCT253-Q100: TTL level

• CMOS low power dissipation

• High noise immunity

• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

• Complies with JEDEC standards

• JESD8C (2.7 V to 3.6 V)

• JESD7A (2.0 V to 6.0 V)

• ESD protection:

• MIL-STD-883, method 3015 exceeds 2 kV

• HBM JESD22-A114F exceeds 2 kV

• MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)

• DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of

solder joints

3. Applications

• Data selectors

• Data multiplexers