1. General description

The 74HC112; 74HCT112 is a dual negative-edge triggered JK flip-flop. It features individual J and

K inputs, clock (nCP) set (nSD) and reset (nRD) inputs. It also has complementary nQ and nQ

outputs. The set and reset are asynchronous active LOW inputs and operate independently of the

clock input. The J and K inputs control the state changes of the flip-flops as described in the mode

select function table. The J and K inputs must be stable one set-up time prior to the HIGH-to-LOW

clock transition for predictable operation. Inputs include clamp diodes that enable the use of current

limiting resistors to interface inputs to voltages in excess of VCC.

Schmitt-trigger action in the clock input makes the circuit highly tolerant to slower clock rise and fall

times.

2. Features and benefits

• Input levels:

• For 74HC112: CMOS level

• For 74HCT112: TTL level

• Asynchronous set and reset

• Specified in compliance with JEDEC standard no. 7A

• ESD protection:

• HBM JESD22-A114F exceeds 2000 V

• MM JESD22-A115-A exceeds 200 V

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C