1. General description

The 74AUP2G241 provides a dual non-inverting buffer/line driver with 3-state outputs. The 3-state

outputs are controlled by the output enable inputs 1OE and 2OE. A HIGH level at pin 1OE causes

output 1Y to assume a high-impedance OFF-state. A LOW level at pin 2OE causes output 2Y to

assume a high-impedance OFF-state.

Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall times

across the entire VCC range from 0.8 V to 3.6 V.

This device ensures a very low static and dynamic power consumption across the entire VCC range

from 0.8 V to 3.6 V.

This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry

disables the output, preventing the damaging backflow current through the device when it is

powered down.

This device has an input-disable feature, which allows floating input signals. The input 1A is

disabled when the output enable input 1OE is HIGH. The input 2A is disabled when the output

enable input 2OE is LOW.

2. Features and benefits

• Wide supply voltage range from 0.8 V to 3.6 V

• High noise immunity

• Complies with JEDEC standards:

• JESD8-12 (0.8 V to 1.3 V)

• JESD8-11 (0.9 V to 1.65 V)

• JESD8-7 (1.2 V to 1.95 V)

• JESD8-5 (1.8 V to 2.7 V)

• JESD8-B (2.7 V to 3.6 V)

• ESD protection:

• HBM JESD22-A114F Class 3A exceeds 5000 V

• MM JESD22-A115-A exceeds 200 V

• CDM JESD22-C101E exceeds 1000 V

• Low static power consumption; ICC = 0.9 μA (maximum)

• Latch-up performance exceeds 100 mA per JESD 78 Class II

• Inputs accept voltages up to 3.6 V

• Low noise overshoot and undershoot < 10 of VCC

• Input-disable feature allows floating input conditions

• IOFF circuitry provides partial Power-down mode operation

• Multiple package options

• Specified from -40 °C to +85 °C and -40 °C to +125 °C