1. General description

The 74AUP1Z04-Q100 is a crystal driver with enable and internal resistor. When not in use the EN

input can be driven HIGH, putting the device in a low power disable mode with X1 pulled HIGH via

RPU, X2 set LOW and Y set HIGH. Schmitt trigger action on the EN input makes the circuit tolerant

to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V. Schmitt-trigger

action at all inputs makes the circuit tolerant of slower input rise and fall times.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100

(Grade 1) and is suitable for use in automotive applications.

2. Features and benefits

• Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

• Wide supply voltage range from 0.8 V to 3.6 V

• CMOS low power dissipation

• High noise immunity

• Overvoltage tolerant inputs to 3.6 V

• Low noise overshoot and undershoot < 10 of VCC

• IOFF circuitry provides partial Power-down mode operation at output Y

• Latch-up performance exceeds 100 mA per JESD78B Class II

• Complies with JEDEC standards:

• JESD8-12 (0.8 V to 1.3 V)

• JESD8-11 (0.9 V to 1.65 V)

• JESD8-7 (1.65 V to 1.95 V)

• JESD8-5 (2.3 V to 2.7 V)

• JESD8C (2.7 V to 3.6 V)

• ESD protection:

• HBM JESD22-A114F Class 3A exceeds 5000 V

• MM JESD22-A115-A exceeds 200 V

• CDM JESD22-C101E exceeds 1000 V