1. General description

The 74ALVCH16841 has two 10-bit D-type latch featuring separate D-type inputs for each latch

and 3-state outputs for bus oriented applications. The two sections of each register are controlled

independently by the latch enable (nLE) and output enable (nOE) control gates.

When nOE is LOW, the data in the registers appears at the outputs. When nOE is HIGH the

outputs are in High-impedance OFF state. Operation of the nOE input does not affect the state of

the flip-flops.

The 74ALVCH16841 has active bus hold circuitry which is provided to hold unused or floating

data inputs at a valid logic level. This feature eliminates the need for external pull-up or pull-down

resistors.

2. Features and benefits

• Wide supply voltage range of 1.2 V to 3.6 V

• CMOS low power consumption

• Direct interface with TTL levels

• Current drive ±24 mA at VCC = 3.0 V

• MULTIBYTE flow-through standard pin-out architecture

• Low inductance multiple VCC and GND pins for minimize noise and ground bounce

• All data inputs have bushold

• Output drive capability 50 Ω transmission lines at 85 °C

• 3-state non-inverting outputs for bus oriented applications

• Complies with JEDEC standards:

• JESD8-5 (2.3 V to 2.7 V)

• JESD8B/JESD36 (2.7 V to 3.6 V)

• ESD protection:

• HBM ANSI/ESDA/JEDEC JS-001 exceeds 2000 V

• CDM JESD22-C101E exceeds 1000 V