1. General description

The 74ALVC164245 is a high-performance, low-power, low-voltage, Si-gate CMOS device,

superior to most advanced CMOS compatible TTL families.

The 74ALVC164245 is a 16-bit (dual octal) dual supply translating transceiver featuring

non-inverting 3-state bus compatible outputs in both send and receive directions. It is designed to

interface between a 3 V and 5 V bus in a mixed 3 V and 5 V supply environment.

This device can be used as two 8-bit transceivers or one 16-bit transceiver.

The direction control inputs (1DIR and 2DIR) determine the direction of the data flow.

nDIR (active HIGH) enables data from nAn ports to nBn ports. nDIR (active LOW) enables data

from nBn ports to nAn ports. The output enable inputs (1OE and 2OE), when HIGH, disable both

nAn and nBn ports by placing them in a high-impedance OFF-state. Pins nAn, nOE and nDIR are

referenced to VCC(A) and pins nBn are referenced to VCC(B).

In suspend mode, when one of the supply voltages is zero, there will be no current flow from the

non-zero supply towards the zero supply. The nAn-outputs must be set 3-state and the voltage on

the A-bus must be smaller than Vdiode (typical 0.7 V). VCC(B) ≥ VCC(A) (except in suspend mode).

2. Features and benefits

• Wide supply voltage range:

• 3 V port (VCC(A)): 1.5 V to 3.6 V

• 5 V port (VCC(B)): 1.5 V to 5.5 V

• CMOS low power consumption

• Overvoltage tolerant inputs to 5.5 V

• Direct interface with TTL levels

• IOFF circuitry provides partial Power-down mode operation

• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

• Control inputs voltage range from 2.7 V to 5.5 V

• High-impedance outputs when VCC(A) or VCC(B) = 0 V

• Complies with JEDEC standards:

• JESD8-7 (1.65 V to 1.95 V)

• JESD8-5 (2.3 V to 2.7 V)

• JESD8C (2.7 V to 3.6 V)

• ESD protection:

• HBM JESD22-A114F exceeds 2000 V

• MM JESD22-A115-A exceeds 200 V

• Specified from -40 °C to +85 °C and -40 °C to +125 °C