Miniaturization of portable equipment and_personal
mobile devices has created increased demand_for a low
profile， high density， and_high reliability connectors.
*The design of this connector has been made thinner and_
smaller， with a height of 0.9mm and_width of 3mm.
*PCB footprint: Reduced approximately 48%_(as compared
with Hirose Electrics 0.5mm pitch FH12 Series
connectors)
*Connector weight: Reduced approximately 78%_(as compared
with Hirose Electrics 0.5mm pitch FH12 Series connectors)
2. Conductive traces on the PCB can run under
the connector
All bottom surface of the connector is solid， without any
exposure of the contact.
3. Proven Flip-Lock Actuator System assures
easy and_reliable operation
Rotating actuator permits easy insertion and_reliable
connection with the FPC & FFC.
Tactile sensation confirms complete mechanical locking of
the actuator and_the electrical connection.
4. Accepts 0.2mm & 0.3mm thick FPC/FFC
No exposed contacts on the bottom of the connector.
The connector will also terminate with 0.2mm thick Flat
Flexible Cable (FFC).
5. Board placement with automatic equipment
Flat upper surface and_tape and_reel packaging facilitate
vacuum pick-up and_placement. Standard reel packaging
contains 5000 connectors.
6. Wide range of contact counts
The contact positions available range from 4 to 50.
7. Satisfies Halogen-free requirements
All materials and_substances used in this product comply
with the Halogen-free standards.
*_Defined according to IEC61249-2-21
Br: 900ppm max， Cl: 900ppm max， Br+Cl: 1，500ppm max
