DESCRIPTION

The µPD703031A, 703031AY, 703033A, 703033AY, 70F3033A, and 70F3033AY (V850/SB1) are 32-/16-bit single-chip microcontrollers of the V850 FamilyTM for AV equipment. 32-bit CPU, ROM, RAM, timer/counters, serial interfaces, A/D converter, DMA controller, and so on are integrated on a single chip.

The µPD70F3033A and 70F3033AY have flash memory in place of the internal mask ROM of the µPD703033A and 703033AY. Because flash memory allows the program to be written and erased electrically with the device mounted on the board, these products are ideal for the evaluation stages of system development, small-scale production, and rapid development of new products.

FEATURES

○ Number of instructions: 74

○ Minimum instruction execution time: 50 ns (@ internal 20 MHz operation)

○ General-purpose registers: 32 bits × 32 registers

○ Instruction set: Signed multiplication, saturation operations, 32-bit shift instructions, bit manipulation instructions,

load/store instructions

○ Memory space: 16 MB linear address space

○ Internal memory ROM: 128 KB (µPD703031A, 703031AY: mask ROM)

256 KB (µPD703033A, 703033AY: mask ROM)

256 KB (µPD70F3033A, 70F3033AY: flash memory)

RAM: 12 KB (µPD703031A, 703031AY)

16 KB (µPD703033A, 703033AY, 70F3033A, 70F3033AY)

○ Interrupt/exception: µPD703031A, 703033A, 70F3033A (external: 8, internal: 30 sources, exception: 1 source)

µPD703031AY, 703033AY, 70F3033AY (external: 8, internal: 31 sources, exception: 1 source)

○ I/O lines Total: 83

○ Timer/counters: 16-bit timer (2 channels: TM0, TM1)

8-bit timer (6 channels: TM2 to TM7)

○ Watch timer: 1 channel

○ Watchdog timer: 1 channel

○ Serial interface

• Asynchronous serial interface (UART0, UART1)

• Clocked serial interface (CSI0 to CSI3)

• 3-wire variable length serial interface (CSI4)

• I2C bus interface (I2C0, I2C1) (µPD703031AY, 703033AY, 70F3033AY only)

○ 10-bit resolution A/D converter: 12 channels

○ DMA controller: 6 channels

○ Real-time output port: 8 bits × 1 channel or 4 bits × 2 channels

○ ROM correction: 4 places can be corrected

○ Power-saving function: HALT/IDLE/STOP modes

○ Packages: 100-pin plastic LQFP (fine pitch) (14 × 14)

100-pin plastic QFP (14 × 20)

○ µPD70F3033A, 70F3033AY

• Can be replaced with µPD703033A and 703033AY (internal mask ROM) in mass production

APPLICATIONS

○ AV equipment (audio, car audio, VCR, TV, etc.)