DESCRIPTION

The µPD168102 is a monolithic 6-channel H bridge driver IC consisting of a CMOS controller and a MOS output stage. Because it uses a MOS process, this driver IC consumes less current and loses less voltage at the output stage than conventional driver ICs that use bipolar transistors. In addition, the µPD168102 employs P-channel MOSFETs in its output stage, eliminating the need for an on-chip the charge pump circuit. Therefore, the current consumption during circuit operation can be significantly reduced.

FEATURES

○ Six H bridge circuits employing power MOSFETs

○ Voltage drive type: 4 channels, current drive type (constant current chopping type): 2 channels

○ Low current consumption due to elimination of charge pump circuit

○ Input logic frequency: 100 kHz supported

○ 3 V power supply supported

Minimum operating supply voltage: 2.5 V

○ Low voltage malfunction prevention circuit

Internal circuit shutdown at VDD < 2.5 V

○ On-chip overheat protection circuit

○ 48-pin WQFN (7 mm × 7 mm)