DESCRIPTION

The µPD160040 is a source driver for TFT-LCDs capable of dealing with displays with 256-gray scales. Data input is based on digital input configured as 8 bits by 6 dots (2 pixels), which can realize a full-color display of 16,777,216 colors by output of 256 values γ -corrected by an internal D/A converter and 8-by-2 external power modules.

Because the output dynamic range is as large as VSS2 + 0.2 V to VDD2 – 0.2 V, level inversion operation of the LCD’s common electrode is rendered unnecessary. Also, to be able to deal with dot-line inversion, n-line inversion and column line inversion when mounted on a single side, this source driver is equipped with a built-in 8-bit D/A converter circuit whose odd output pins and even output pins respectively output gray scale voltages of differing polarity.

FEATURES

• CMOS level input

• 384 outputs

• Input of 8 bits (gray scale data) by 6 dots

• Capable of outputting 256 values by means of 8-by-2 external power modules (16 units) and a D/A converter

• Logic power supply voltage (VDD1): 2.5 to 3.6 V

• Driver power supply voltage (VDD2): 12.5 to 15.5 V (switchable, VSEL)

• Output dynamic range: VSS2 + 0.2 V to VDD2 – 0.2 V

• High-speed data transfer:

fCLK. = 55 MHz MAX. (internal data transfer speed when operating at 3.0 V ≤ VDD1 ≤ 3.6 V)

fCLK. = 40 MHz MAX. (internal data transfer speed when operating at 2.5 V ≤ VDD1 < 3.0 V)

• Apply for dot-line inversion, n-line inversion and column line inversion

• Output voltage polarity inversion function (POL)

• Output inversion function (POL21, POL 22)

• Output reset control is possible (MODE)

• Through-rate control is possible (SRC)

• Output resistance control is possible (ORC)

• Single bank arrangement is possible (loaded with slim TCP)