FEATURES

1. High capacity type power photoMOS relay.

Can switch a wide range of currents and voltages. Can control various types of loads, from very small loads to a maximum 6A AC/DC current for sequencers, motors, and lamps.

2. Low ON resistance and high sensitivity.

Low ON resistance of less than 50 mW on a par with mechanical relays (AQZ262).

High sensitivity LED operate current of 3 mA (at 25°C 77°F ).

3. AC/DC dual use

Bi-directional control is possible. There is no need to differentiate depending on the load as was necessary with the conventional SSR.

4. 4-pin SIL type.

4-pin SIL type of (L) 43.0 mm × (W) 9.0 mm × (H) 32.0 mm (L) 1.693 inch× (W) .354 inch× (H) 1.260 inch.

5. Low-level off state leakage current

In contrast to the SSR with an off state leakage current of several milliamps, the PhotoMOS relay features a very small off state leakage current of only 10mA even at the rated load voltage.

6. Controls low-level analog signals

The triac, photocoupler, or SSR cannot be used to control signals of less than several hundred mV. The high capacity type power PhotoMOS relay feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion.

TYPICAL APPLICATIONS

• Mercury relay replacement

• Railroad, traffic signals

• Compact motors, lamps, heaters

• OA equipment

• Measurement instruments