Single-Chip 16Cx2L Dot-Matrix LCD Controller / Driver

[Novatek] General Description The NT7603 is a dot matrix LCD controller and driver LSI that can operate with either a 4-bit or an 8-bit microprocessor (MPU). NT7603 receives control character codes from the MPU, stores them in an internal RAM (up to 80 characters), transforms each characte

Single-Chip 16C X 2L Dot-Matrix LCD Controller / Driver

Single-Chip 16Cx2L Dot-Matrix LCD Controller / Driver

[Novatek] General Description The NT7603 is a dot matrix LCD controller and driver LSI that can operate with either a 4-bit or an 8-bit microprocessor (MPU). NT7603 receives control character codes from the MPU, stores them in an internal RAM (up to 80 characters), transforms each characte

Single-Chip 16Cx2L Dot-Matrix LCD Controller / Driver

[Novatek] General Description The NT7603 is a dot matrix LCD controller and driver LSI that can operate with either a 4-bit or an 8-bit microprocessor (MPU). NT7603 receives control character codes from the MPU, stores them in an internal RAM (up to 80 characters), transforms each characte

Single-Chip 16Cx2L Dot-Matrix LCD Controller / Driver

[Novatek] General Description The NT7603 is a dot matrix LCD controller and driver LSI that can operate with either a 4-bit or an 8-bit microprocessor (MPU). NT7603 receives control character codes from the MPU, stores them in an internal RAM (up to 80 characters), transforms each characte

Single-chip 16C x 2L dot-matrix LCD controller/driver

10 Gb/s High Overload TIA PRELIMINARY DATA SHEET - Rev 1.0

PRODUCT DESCRIPTION The ANADIGICS ATA7603 is a –5.2 V high-speed transimpedance amplifier (TIA) designed for 10 Gb/s optical receiver applications available in bare die form and manufactured using an InGaP based HBT process. The device is used in conjunction with a photodetector to convert an opt

Video signal switcher

Video signal switcher The BA7603 and BA7603F are switching ICs developed for use in VCRs. Each contains three two-channel analog multi-plexers. The switches have sync-tip clamped inputs and are ideal for switching video signals. Features 1) Three 2-input / 1-output switches. 2)

Triple Circuits Video Signal Switchers

●Description These video switching ICs, which contain two or three 2-input circuits, were developed for switching TV, DVD, and other video signals. Input pin formats can be selected from bias mode (R=20 kΩ), sync-tip mode, and pedestal clamp mode. Having a large dynamic range and broad frequenc

1-13/16 Diameter 10-Turn Wirewound Precision Potentiometer

文件：64.25 Kbytes Page：4 Pages

HOLE PLUGS and BUSHINGS

文件：320.57 Kbytes Page：1 Pages