LOW-POWER TINY SINGLE C-MOS OPERATIONAL AMPLIFIER

■ FEATURES ● Single-Power-Supply ● Wide Operating Voltage ( VDD=1~5.5V ) ● Wide Output Swing Range ( VOM=2.9V min. @ 3.0V ) ● Low Operating Current ● Low Bias Current ( IIB=1pA typ. ) ● Internal Compensation Capacitor ● Package Outline SOT−23−5 ● C-MOS Technology

低功率小型单路C-MOS运算放大器

NJU7011、12和13是单路C-MOS运算放大器，使用单电源、低电压和低工作电流。输入偏置电流低至1pA，所以甚至可以放大接地电平左右的极小信号。最低工作电压是1V，输出阶段允许输出信号在两个电源轨之间摆动。此外，此系列采用极小的SOT-23-5封装方式，所以非常适用于便携式设备。 • 单电源\n• 宽工作电压 (VDD=1到5.5V)\n• 宽输出摆幅 (3.0V时，VOM最小为2.9V)\n• 低工作电流\n• 低输入偏置电流 (一般情况下IIB=1pA)\n• 内置相位补偿电容\n• 封装 (SOT-23-5)\n• C-MOS技术;

LOW-POWER TINY SINGLE C-MOS OPERATIONAL AMPLIFIER?

文件：260.079 Kbytes Page：9 Pages

CMOS TIA IS-54 Baseband Receive Port

GENERAL DESCRIPTION The AD7013 is a complete low power, CMOS, TIA IS-54 baseband receive port with single +5 V power supply. The part is designed to perform the baseband conversion of I and Q waveforms in accordance with the American (TIA IS-54) Digital Cellular Telephone system. FEATURES S

CMOS TIA IS-54 Baseband Receive Port

GENERAL DESCRIPTION The AD7013 is a complete low power, CMOS, TIA IS-54 baseband receive port with single +5 V power supply. The part is designed to perform the baseband conversion of I and Q waveforms in accordance with the American (TIA IS-54) Digital Cellular Telephone system. FEATURES S

Triggered Vacuum Gaps

The Triggered Vacuum Spark Gaps are ideal high-voltage switches for applications where a wide operating voltage range is desired. The low end of the operating voltage range is independent of the Static Breakdown Voltage (SBV). Operating ranges from 300 volts to 80 kilovolts are possible. Switching

Integrated Circuit Remote Control Preamp with Active ?쏬ow?

Description: The NTE7013 is a bipolar integrated circuit in an 8–Lead DIP type package intended for infrared remote control applications. This device has an active “Low” output polarity and contains a high–gain amplifier, a limiter amplifier, a band–pass filter, a detector, and a pulse shaper.