2-in-1 DDR Power Controller

The NCP5203 2-in-1 DDR Power Controller is a complete power solution for an ACPI compliant high current DDR memory system. This IC combines the efficiency of a PWM controller for the VDDQ supply with the simplicity of linear regulator for the VTT termination voltage. The NCP5203 contains a synchro • Incorporates VDDQ, VTT Regulators\n• All External Power MOSFETs are N-Channel\n• Adjustable VTT\n• Fixed Switching Frequency of 600 kHz for VDDQ in S3\n• Undervoltage Monitor of 5VDUAL\n• Thermal Shutdown\n• VTT Regulator includes Integrated Power FETs Sourcing/Sinking up to 2.0A\n• Pb-Free Packag;

2-in-1 DDR Power Controller

文件：69.6 Kbytes Page：10 Pages

2-in-1 DDR Power Controller

文件：69.6 Kbytes Page：10 Pages

封装/外壳：18-VFDFN 裸露焊盘 包装：管件 描述：IC REG CTRLR DDR 2OUT 18DFN 集成电路（IC） 特殊用途稳压器

2-in-1 DDR Power Controller

文件：69.6 Kbytes Page：10 Pages

封装/外壳：18-VFDFN 裸露焊盘 包装：管件 描述：IC REG CTRLR DDR 2OUT 18DFN 集成电路（IC） 特殊用途稳压器

4A SCRs

DESCRIPTION Thanks to highly sensitive triggering levels, the TS420 series is suitable for all applications where the available gate current is limited, such as motor control for hand tools, kitchen aids, overvoltage crowbar protection for low power supplies, ... Available in through-hole or

8-Bit Dual Nonvolatile Memory Digital Potentiometer

GENERAL DESCRIPTION The AD5232 device provides a nonvolatile, dual-channel, digitally controlled variable resistor (VR) with 256-position resolution. This device performs the same electronic adjustment function as a mechanical potentiometer with enhanced resolution, solid state reliability, and s

80mA ULTRA LOW DROPOUT VOLTAGE REGULATOR

DESCRIPTION The SC5203 is an 80 mA ultra low droput linear regulator with a built in CMOS/TTL logic level Enable switch, designed specifically for battery powered applications where low quiescent current and low dropout are critical for battery longevity. APPLICATIONS ● Battery Powered Systems

3-A DC Motor Driver

Description TLE 5203 is an integrated power bridge with DMOS output stages for driving DC motors. This motor bridge is optimized for driving DC motors in reversible operation. The internal protective circuitry in particular ensures that no crossover currents can occur. Because the free-wheeling

GaAlAs Infrared Emitting Diodes in ø 5 mm (T–13/4) Package

Description The TSHA520. series are high efficiency infrared emitting diodes in GaAlAs on GaAlAs technology, molded in a clear, untinted plastic package. In comparison with the standard GaAs on GaAs technology these high intensity emitters feature about 70 radiant power improvement. Features