TinyLogic ULP-A Buffer with 3-STATE Output

General Description The NC7SV125 is a single buffer with 3-STATE output from Fairchild’s Ultra Low Power-A (ULP-A) Series of TinyLogic®. ULP-A is ideal for applications that require extreme high speed, high drive and low power. This product is designed for wide low voltage operating range (0.9V t

TinyLogic ULP-A Buffer with Three-State Output

The NC7SV125 is a single non−inverting 3−state buffer in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 1.0 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Supports

TinyLogic ULP-A 缓冲器，带 3 态输出

NC7SV125是带3态输出的单通道缓冲器，属于飞兆TinyLogic®中的超低功耗(ULP-A)系列。 ULP-A是要求极高速度、高驱动和低功耗的应用的理想选择。 此产品设计用于宽低电压工作范围（0.9V到3.6V VCC），适合驱动和速度要求高于TinyLogic ULP系列的应用，但仍具有同级最佳的低功耗运行特点。 NC7SV125专为优化功耗和速度而设计，采用先进的CMOS技术制造，在实现高速运行的同时又能保持较低的CMOS功耗。 •0.9V至3.6V VCC电源操作范围\n•VCC为0.9 V至3.6 V时，耐过压I/O为3.6 V\n•极高速度tPD1.0 ns（典型值），2.7V到3.6V VCC2.0ns（典型值），2.3V到2.7V VCC3.0 ns（典型值），1.65V到1.95V VCC3.5 ns （典型值），1.4V到1.6V VCC6.0 ns（典型值），1.1V到1.3V VCC13 ns（典型值），0.9V VCC\n•断电高阻抗输入和输出\n•高静态驱动(IOH/IOL)±24 mA @ 3.00V VCC±18 mA @ 2.30V VCC±6 mA @ 1.65V VCC±4 mA @ 1;

TinyLogic ULP-A Buffer with 3-STATE Output

文件：312.24 Kbytes Page：9 Pages

TinyLogic LP-A Buffer with 3-STATE Output

文件：406.64 Kbytes Page：11 Pages

TinyLogic ULP-A Buffer with Three-State Output

The NC7SV125 is a single non−inverting 3−state buffer in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 1.0 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Supports

丝印代码：H6；TinyLogic ULP-A Buffer with Three-State Output

The NC7SV125 is a single non−inverting 3−state buffer in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 1.0 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Supports

TinyLogic ULP-A Buffer with 3-STATE Output

General Description The NC7SV125 is a single buffer with 3-STATE output from Fairchild’s Ultra Low Power-A (ULP-A) Series of TinyLogic®. ULP-A is ideal for applications that require extreme high speed, high drive and low power. This product is designed for wide low voltage operating range (0.9V t

TinyLogic ULP-A Buffer with 3-STATE Output

General Description The NC7SV125 is a single buffer with 3-STATE output from Fairchild’s Ultra Low Power-A (ULP-A) Series of TinyLogic®. ULP-A is ideal for applications that require extreme high speed, high drive and low power. This product is designed for wide low voltage operating range (0.9V t

丝印代码：V25；TinyLogic ULP-A Buffer with Three-State Output

The NC7SV125 is a single non−inverting 3−state buffer in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 1.0 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Supports

TinyLogic ULP-A Buffer with 3-STATE Output

文件：312.24 Kbytes Page：9 Pages

TinyLogic ULP-A Buffer with 3-STATE Output

文件：312.24 Kbytes Page：9 Pages

丝印代码：H6；TinyLogic LP-A Buffer with 3-STATE Output

文件：406.64 Kbytes Page：11 Pages

封装/外壳：6-UFDFN 包装：卷带（TR） 描述：IC BUF NON-INVERT 3.6V 6MICROPAK 集成电路（IC） 缓冲器，驱动器，接收器，收发器

封装/外壳：5-TSSOP，SC-70-5，SOT-353 包装：卷带（TR） 描述：IC BUF NON-INVERT 3.6V SC70-5 集成电路（IC） 缓冲器，驱动器，接收器，收发器

丝印代码：V25；TinyLogic LP-A Buffer with 3-STATE Output

文件：406.64 Kbytes Page：11 Pages

TinyLogic ULP-A Buffer with 3-STATE Output

文件：312.24 Kbytes Page：9 Pages