DESCRIPTION

The MPQ2167 is a frequency programmable (300kHz to 2.2MHz) synchronous step-down converter. It can achieve up to 4A continuous output current with peak current control for excellent transient response and efficiency performance. The MPQ2167 operates from a 2.7V to 6.0V input range and generates an output voltage as low as 0.606V. It is ideal for a wide range of applications, including automotive infotainment, clusters, telematics, and portable instruments.

The MPQ2167 integrates a 35mΩ high-side switch and a 25mΩ synchronous rectifier for high efficiency without an external Schottky diode. With internal compensation, the MPQ2167 requires a minimum number of readily available standard external components and is available in a QFN-11(2mm x 3mm) package.

The MPQ2167 can be configured for either advanced asynchronous mode (AAM) or forced continuous conduction mode (FCCM) operation at light load. AAM provides high efficiency by reducing switching losses at light load while FCCM has controllable frequency and a lower output ripple.

The MPQ2167 offers standard features, including soft-start, enable control, and a power good indicator. In addition, the MPQ2167 provides over-current protection with valley current detection, which is used to avoid current runaway. Also, it has short-circuit protection, reliable overvoltage protection, and auto recovery thermal protection.

FEATURES

 2.7V to 6.0V Operating Input Range

 Adjustable Output from 0.606V

 Up to 4A Continuous Output current

 High Efficiency Synchronous Mode Control

 35mΩ and 25mΩ Internal Power MOSFET

 Programmable Frequency up to 2.2MHz

 42μA Quiescent Current

 Low Shutdown Mode Current

 100% Duty Cycle Operation

 Internal Compensation Mode

 Selectable AAM or FCCM Operation Option

 External Soft Start

 Remote EN Control

 Power Good Indicator

 Cycle-by-Cycle Over-Current Protection

 Short-Circuit Protection

 VIN Under-Voltage Lockout

 VOUT Over-Voltage Protection

 Thermal Shutdown

 Available in QFN-11(2mm x 3mm) Package

 Available in AEC-Q100 Grade-1

APPLICATIONS

 Automotive Infotainment

 Automotive Clusters

 Automotive Telematics

 Industrial Supplies

 Battery-Powered Devices