Application

The four indent crimp tool KP-TOOL-01 / 1201550017 has been developed for optimal crimping of

machined contacts with diameters from 0.14 to 6.0 mm2 (26 through 10 AWG).

How to Crimp

The reference table indicates the correct locator position to be selected and the crimp

depth to be adjusted for the contact to be crimped. The contact is then inserted through

the access hole of the tool on the opposite side of the locator. The contact is held in place

by closing the handles to the first lock-in position thus preventing the contact from falling

out of the tool and facilitating insertion of the wire into the contact.

The precision ratchet assures consistently accurate crimping every time by forcing the tool

to be closed all the way completing the crimping cycle before the tool can be opened

again.