Features

• Micron® 3D TLC NAND Flash

• RoHS-compliant package

• SATA 6 Gb/s interface

• TCG/Opal 2.0-compliant self-encrypting drive

(SED)

• Compatible with Microsoft eDrive®

• Hardware-based AES-256 encryption engine

• ATA modes supported

– PIO mode 3, 4

– Multiword DMA mode 0, 1, 2

– Ultra DMA mode 0, 1, 2, 3, 4, 5, 6

• Industry-standard, 512-byte sector size support

• Hot-plug/hot-remove capable (2.5)

• Device sleep (DEVSLP), extreme low-power mode

• Native command queuing support with 32-command

slot support

• ATA-8 ACS3 command set compliant

• ATA security feature command set and password

login support

• Secure erase (data page) command set: fast and secure

erase

• Sanitize device feature set support

• Self-monitoring, analysis, and reporting technology

(SMART) command set

• Dynamic write acceleration

• Adaptive thermal monitoring

• Power loss protection for data-at-rest

• Performance1, 2

– PCMark® Vantage (HDD test suite score): Up to

84,000

– Sequential 128KB READ: Up to 530 MB/s

– Sequential 128KB WRITE: Up to 500 MB/s

– Random 4KB READ: Up to 55,000 IOPS

– Random 4KB WRITE: Up to 83,000 IOPS

– READ/WRITE latency: 85μs/40μs (TYP)

• Reliability

– MTTF: 1.5 million device hours3

– Static and dynamic wear leveling

– Uncorrectable bit error rate (UBER): <1 sector

per 1015 bits read

• Low power consumption

– Device Sleep numbers: <4mW

– DIPM numbers: 110mW TYP4

• Endurance: Total bytes written (TBW)

– 120TB

• Capacity (unformatted): 128GB

• 2.5-inch × 7mm form factor

• Secure firmware update with digitally signed firmware

image

• Operating temperature

– Commercial (0°C to +70°C)5

Notes: 1. Typical I/O performance numbers as measured

fresh-out-of-the-box (FOB) using Iometer

with a queue depth of 32 and write

cache enabled.

2. 4 KB transfers used for READ/WRITE latency

values.

3. The product achieves a mean time to failure

(MTTF) based on population statistics not

relevant to individual units.

4. Active average power measured during execution

of MobileMark® with DIPM (deviceinitiated

power management) enabled.

5. Temperature measured by SMART attribute

194.