Features

• Automotive AEC-Q100 Qualified

• 1:9 LVCMOS Output Fanout Buffer from DC to

160 MHz

• Low Additive Phase Jitter of 60 fs RMS

• 8 mA Output Drive Strength

• Low Power Consumption for Portable

Applications

• Automotive Applications Grade 1 Compliant

• Low Input-Output Delay

• Output-Output Skew <250 ps

• 2.5V to 3.3V, ±10% Operation

• 1.8V +10%/–5% Operation up to 67 MHz

• Wide Temperature Range: –40°C to +125°C

• Available in 16-Pin Wettable Flanks VQFN

Package

Applications

• Automotive Applications

- ADAS Vision System

- Infotainment and Dashboard

General Description

The PLA133-97 is an advanced fanout buffer designed

for automotive applications and other high

performance, low-power, small form factor

applications. The PLA133-97 accepts a reference clock

input from DC to 160 MHz and provides nine outputs of

the same frequency with ultra-low additive jitter. The

device is AEC-Q100 qualified.

The PLA133-97 is offered in a small 3 mm x 3 mm

wettable flanks VQFN-16L package.

The PLA133-97 outputs can be disabled to a high

impedance (tri-state) by pulling low the OE pin. When

the OE pin is high, the outputs are enabled and follow

the REF input signal. When the OE pin is left open, a

pull-up resistor on the chip will default the OE pin to

logic 1 so the outputs are enabled.

CLK8 is a free running output that remains enabled

when the OE pin is pulled low.