Features

• Operating Voltage Range:

- VDDQ Supply: 0.9V to 3.6V

- Bias Supply: 2.5V to 5.5V

• High Bandwidth: Very Fast Transient Response

• Stable with Two 10 μF Ceramic Output Capacitors

• Two 10 μF Output Capacitors used in Most Applications

• High Output Voltage Accuracy:

- 0.015% Line Regulation

- 1.5% Load Regulation

• Logic Level Enable Input

• Power Good (PG)

• Thermally Enhanced 3 mm x 3 mm DFN

• Junction Temperature Range –40°C to +125°C

• This Device Meets DDR4 Requirements

Applications

• Desktop Computers

• Notebook Computers

• Datacom Systems

• Servers

• Video Cards

General Description

The MIC5166 is a 3A, high-speed, linear, low VIN, double data rate (DDR), memory terminator power supply. The part is small and requires small output capacitors, making it a tiny overall solution. This allows it to be conveniently placed close to the DDR memory, minimizing circuit board layout inductance that may cause excessive voltage ripple at the DDR memory.

The MIC5166 contains a precision voltage divider network in order to take in the VDDQ voltage as a reference voltage and conveniently output the terminator voltage (VTT) at one half of the VDDQ input voltage.

The MIC5166 is capable of sinking and sourcing up to 3A. It is stable with only two 10 μF ceramic output capacitors. The part is available in a small 3 mm x 3 mm DFN thermally-enhanced package.

The MIC5166 has a high-side NMOS output stage offering very low output impedance, and very high bandwidth. The NMOS output stage offers a unique ability to respond very quickly to sudden load changes such as is required for DDR memory termination power supply applications.