Features

• High Peak Output Current: 1.5A (typical)

• Wide Input Supply Voltage Operating Range:

- 4.5V to 18V

• Low Shoot-Through/Cross-Conduction Current in

Output Stage

• High Capacitive Load Drive Capability:

- 4 70 pF in 13 ns (typical)

- 1 000 pF in 18 ns (typical)

• Short Delay Ti mes: 44 ns (tD1 ), 47 ns (MCP1415

tD2 ), 54 ns (MCP1416 tD2) (typical)

• Low Supply Current:

- With Logic ‘1’ Input - 0.65 mA (typical)

- With Logic ‘0’ Input - 0.1 mA (typical)

• Latch-Up Protected: Withstands 5 00 mA Reverse

Current

• Logic Input Withstands Negative Swing up to 5V

• Space-Saving 5L SOT-23 Package

Applications

• Switch Mode Power Supplies

• Pulse Transformer Drive

• Line Drivers

• Level Translator

• Motor and Solenoid Drive

General Description

The MCP1415/16 devices are high-speed, dual

MOSFET drivers that are capable of providing up to

1.5A of peak current while operating from a single 4.5V

to 18V supply. The inverting or non-inverting single

channel output is directly controlled from either TTL or

CMOS (3V to 18V) logic. These devices also feature

low shoot-through current, matched rise and fall time,

and short propagation delays which make them ideal

for high switching frequency applications. They provide

low enough impedances in both the ‘On’ and ‘Off’

states to ensure the intended state of the MOSFET is

not affected, even by large transients.

These devices are highly latch-up resistant under any

condition within their power and voltage ratings. They

are not subject to damage when noise spiking (up to

5V, of either polarity) occurs on the Ground pin. They

can accept up to 500 mA of reverse current being

forced back into their outputs without damage or logic

upset. All terminals are fully protected against

electrostatic discharge (ESD) up to 2 .0 kV (HBM) and

300V (MM).