Features

• Single-Chip 10/100/1000 Mbps Ethernet Transceiver

Suitable for IEEE 802.3 Applications

• GMII/MII Standard Interface with 3.3V/2.5V/1.8V

Tolerant I/Os

• Auto-Negotiation to Automatically Select the

Highest Link-Up Speed (10/100/1000 Mbps) and

Duplex (Half/Full)

• On-Chip Termination Resistors for the Differential

Pairs

• On-Chip LDO Controller to Support Single 3.3V

Supply Operation

• Jumbo Frame Support Up to 16 KB

• 125 MHz Reference Clock Output

• Energy-Detect Power-Down Mode for Reduced

Power Consumption When the Cable is Not

Attached

• Wake-On-LAN (WOL) Support with Robust Custom-

Packet Detection

• Programmable LED Outputs for Link, Activity, and

Speed

• Baseline Wander Correction

• LinkMD TDR-based Cable Diagnostic to Identify

Faulty Copper Cabling

• Parametric NAND Tree Support to Detect Faults

Between Chip I/Os and Board

• Loopback Modes for Diagnostics

• Automatic MDI/MDI-X Crossover to Detect and

Correct Pair Swap at All Speeds of Operation

• Automatic Detection and Correction of Pair

Swaps, Pair Skew, and Pair Polarity

• MDC/MDIO Management Interface for PHY Register

Configuration

• Interrupt Pin Option

• Power-Down and Power-Saving Modes

• Operating Voltages

- Core (DVDDL, AVDDL, AVDDL_PLL): 1.2V

(External FET or Regulator)

- VDD I/O (DVDDH): 3.3V, 2.5V, or 1.8V

- Transceiver (AVDDH): 3.3V or 2.5V

(Commercial Temp.)

• 64-pin QFN (8 mm × 8 mm) Package

Target Applications

• Laser/Network Printer

• Network Attached Storage (NAS)

• Network Server

• Broadband Gateway

• Gigabit SOHO/SMB Router

• IPTV

• IP Set-Top Box

• Game Console

• IP Camera

• Triple-Play (Data, Voice, Video) Media Center

• Media Converter