DESCRIPTION

The Microchip Technology Inc. 24AA164 is a cascad able 16K bit Electrically Erasable PROM. The device is organized as eight blocks of 256 x 8-bit memory with a 2-wire serial interface. Low voltage design permits operation down to 1.8 volts (end-of-life voltage for most popular battery technologies) with standby and active currents of only 5 µA and 1 mA respectively. The 24AA164 also has a page-write capability for up to 16 bytes of data. The 24AA164 is available in the standard 8-pin DIP and 8-lead surface mount SOIC packages.

The three select pins, A0, A1, and A2, function as chip select inputs and allow up to eight devices to share a common bus, for up to 128K bits total system EEPROM.

FEATURES

• Single supply with operation down to 1.8V

• Low power CMOS technology

- 1 mA active current typical

- 10 µA standby current typical at 5.5V

- 5 µA standby current typical at 3.0V

• Organized as 8 blocks of 256 bytes (8 x 256 x 8)

• 2-wire serial interface bus, I2C compatible

• Functional address inputs for cascading up to 8 devices

• Schmitt trigger, filtered inputs for noise suppression

• Output slope control to eliminate ground bounce

• 100 kHz (1.8V) and 400 kHz (5V) compatibility

• Self-timed write cycle (including auto-erase)

• Page-write buffer for up to 16 bytes

• 2 ms typical write cycle time for page-write

• Hardware write protect for entire memory

• Can be operated as a serial ROM

• Factory programming (QTP) available

• ESD protection > 4,000V

• 1,000,000 Erase/Write cycles guaranteed

• Data retention > 200 years

• 8-pin DIP, 8-lead SOIC packages

• Available for commercial temperature range

- Commercial (C): 0°C to +70°C