General Description

The MIC3003GFL is a fiber optic module controller which enables the implementation of sophisticated, hot-pluggable fiber optic transceivers with intelligent laser control and an

internally calibrated Digital Diagnostic Monitoring Interface per SFF-8472. It essentially integrates all non-data path functions of an SFP/SFP+ transceiver into a tiny (3mm x 3mm) MLF® package. It also works well as a microcontroller peripheral in transponders or 10Gbps transceivers. The MIC3003GFL uses the same die as the MIC3003 with all its functions, but in a smaller package and different pin out.

Features

• Packaged in a ultra small (3mm x 3mm) 24-pin MLF® package

• Extended temperature range

• Alarms and warnings interrupt and TXFAULT masks

• Capability to support up to four devices on one SMBus

• APC or constant-current laser bias

• Turbo mode for APC loop start-up and shorter laser turn on time

• Supports multiple laser types and bias circuit topologies

• Integrated digital temperature sensor

•Temperature compensation of modulation, bias, bias fault and alarm thresholds via NVRAM look-up tables

• NVRAM to support GBIC/SFP serial ID function

• User writable EEPROM scratchpad

• Reset signal compatible with some new systems requirements

• Diagnostic monitoring interface per SFF-8472

– Monitors and reports critical parameters: temperature, bias current, TX and RX optical power, and supply voltage

– S/W control and monitoring of TXFAULT, RXLOS, RATESELECT, and TXDISABLE

– Internal or external calibration

– EEPOT for adjusting RX power measurement

• Power-on hour meter

• Interrupt capability

• Extensive test and calibration features

• 2-wire SMBus-compatible serial interface

• SFP/SFP+ MSA and SFF-8472 compliant

• 3.0V to 3.6V power supply range

• 5V-tolerant I/O

Applications

• SFP/SFP+ optical transceivers

• SONET/SDH transceivers and transponders

• Fibre Channel transceivers

• 10Gbps transceivers

• Free space optical communications

• Proprietary optical links