1.2 Features

 Embedded single core 32-bit RISC CPU for better system level management between subsystems

 Supports single antenna for Bluetooth and WLAN

 Self calibration

 Single crystal for GPS, BT and WLAN

 Integrated switching regulator enables direct connection to battery

 Best-in-class current consumption performance

 OS support: Android and Windows Mobile

 Intelligent BT/WLAN coexistence scheme that goes beyond PTA signaling (for example, transmit

window and duration that take into account of protocol exchange sequence, frequency, etc.)

 Single antenna support for WLAN/Bluetooth/GPS

 WLCSP (3.99x4.45mm2) package

WLAN

 Single-band (2.4GHz) single stream 802.11 b/g/n MAC/BB/RF

 802.11 d/h/k compliant

 Security: WFA WPA/WPA2 personal, WPS2.0, WAPI (Hardware)

 QoS: WFA WMM, WMM PS

 Supports 802.11n optional features: STBC, A-MPDU, Blk-Ack, RIFS, MCS Feedback, 20/40MHz

coexistence (PCO), unscheduled PSMP

 Supports 802.11w Protected Managed Frames

 Supports WiFi Direct (WFA P-2-P standard) and Wi-Fi Miracast (Wi-Fi Display)

 Supports HotSpot 2.0 Passpoint

 Interface: SDIO 2.0 (4-bit & 1-bit, up to 50MHz), SPI (48Mbps)

 Integrated PA with max 21dBm output power

 Typical -77.5 dBm 2.4GHz receiver sensitivity at 11g 54Mbps mode

 Per packet TX power control

Bluetooth

 Bluetooth specification v2.1+EDR

 Bluetooth specification 3.0+HS compliance

 Bluetooth v4.0 Low Energy (LE)

 Integrated PA with 10dBm (class 1) transmit power and Balun

 Rx sensitivity: GFSK -95dBm, DQPSK -94dBm, 8-DPSK -88dBm

 HCI over high speed (4Mbps) UART(H4), and SDIO 2.0

 Best-in-class BT/Wi-Fi coexistence performance

 Up to 4 piconets simultaneously with background inquiry/page scan

 Supports Scatternet

 Packet loss concealment (PLC) function for better voice quality

 Low-power scan function to reduce the power consumption in scan modes

GPS

 Supports GPS/QZSS/SBAS (WAAS/MSAS/EGNOS/GAGAN)

 Best-in-class sensitivity performance

– -165 dBm tracking sensitivity

– -163 dBm hot start sensitivity

– -148 dBm cold start sensitivity

– -151 dBm warm start sensitivity

 Full A-GPS capability (E911/SUPL/EPO/HotStill)

 Active interference cancellation for up to 8 in-band tones

 Low-power operational modes for mobile phone and DSC applications

 Supports XTAL

 5Hz update rate

FM

 76-108MHz with 50kHz step

 Supports RDS/RBDS

 Digital stereo modulator/demodulator

 Digital audio interface (I2S)

 Fast seek time 30ms/channel

 Stereo noise reduction

 Audio sensitivity 2dBμVemf ((S+N)/N=26dB)

 Audio S/N 60dB

 Anti-jamming

 Integrated short antenna

1.3 Applications

 Smart phone applications

 Media Tablet applications

 Mobile Internet Device (MID) applications

 Portable Navigation Device (PND) applications

 Portable Media Player (PMP) applications

 Portable gaming devices