FEATURES

GENERAL FEATURES

• Single Power Supply Operation

- 2.7 to 3.6 volt for read, erase, and program operations

• 8,388,608 x 8 / 4,194,304 x 16 switchable

• Sector structure

- 8KB (4KW) x 8 and 64KB(32KW) x 127

• Sector Protection/Chip Unprotect

- Provides sector group protect function to prevent

program or erase operation in the protected sector

group

- Provides chip unprotect function to allow code

changes

- Provides temporary sector group unprotect function

for code changes in previously protected sector groups

• Secured Silicon Sector

- Provides a 128-word area for code or data that can

be permanently protected.

- Once this sector is protected, it is prohibited to program or erase within the sector again.

• Latch-up protected to 250mA from -1V to Vcc + 1V

• Low Vcc write inhibit is equal to or less than 1.5V

• Compatible with JEDEC standard

- Pin-out and software compatible to single power supply Flash

PERFORMANCE

• High Performance

- Fast access time: 90/120ns

- Fast program time: 11us/word, 45s/chip (typical)

- Fast erase time: 0.9s/sector, 45s/chip (typical)

• Low Power Consumption

- Low active read current: 10mA (typical) at 5MHz

- Low standby current: 0.2uA (typ.)

• Minimum 100,000 erase/program cycle

• 20-year data retention

SOFTWARE FEATURES

• Support Common Flash Interface (CFI)

- Flash device parameters stored on the device and

provide the host system to access.

• Erase Suspend/ Erase Resume

- Suspends sector erase operation to read data from

or program data to another sector which is not being

erased

• Status Reply

- Data polling & Toggle bits provide detection of program and erase operation completion

HARDWARE FEATURES

• Ready/Busy (RY/BY) Output

- Provides a hardware method of detecting program

and erase operation completion

• Hardware Reset (RESET) Input

- Provides a hardware method to reset the internal

state machine to read mode

• WP Pin

- Write protect (WP) function allows protection of two

outermost boot sectors, regardless of sector protect

status

PACKAGE

• 48-pin TSOP

• 63-ball CSP

• 64-ball Easy BGA