GENERAL DESCRIPTION

The MX29LV040C is a 4-mega bit Flash memory organized as 512K bytes of 8 bits. MXICs Flash memories offer the most cost-effective and reliable read/write nonvolatile random access memory. The MX29LV040C is packaged in 32-pin PLCC and TSOP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.

FEATURES

• Extended single - supply voltage range 2.7V to 3.6V

• 524,288 x 8 only

• Single power supply operation

- 3.0V only operation for read, erase and program operation

• Fully compatible with MX29LV040 device

• Fast access time: 55R/70/90ns

• Low power consumption

- 30mA maximum active current

- 0.2uA typical standby current

• Command register architecture

- 8 equal sector of 64K-Byte each

- Byte Programming (9us typical)

- Sector Erase (Sector structure 64K-Byte x8)

• Auto Erase (chip & sector) and Auto Program

- Automatically erase any combination of sectors with Erase Suspend capability.

- Automatically program and verify data at specified address

• Erase suspend/Erase Resume

- Suspends sector erase operation to read data from, or program data to, any sector that is not being erased, then resumes the erase.

• Status Reply

- Data# Polling & Toggle bit for detection of program and erase operation completion.

• Sector protection

- Hardware method to disable any combination of sectors from program or erase operations

- Any combination of sectors can be erased with erase suspend/resume function

• CFI (Common Flash Interface) compliant

- Flash device parameters stored on the device and provide the host system to access

• 100,000 minimum erase/program cycles

• Latch-up protected to 100mA from -1V to VCC+1V

• Package type:

- 32-pin PLCC

- 32-pin TSOP

- All Pb-free devices are RoHS Compliant

• Compatibility with JEDEC standard

- Pinout and software compatible with single-power supply Flash

• 20 years data retention