GENERAL DESCRIPTION

The MXICs MX26L6419 series MTP use the most advance 2 bits/cell Nbit technology, double the storage capacity of memory cell. The device provide the high density MTP memory solution with reliable performance and most cost-effective.

The device organized as by 16 bits of output bus. The device is packaged in 48-Lead TSOP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.

FEATURES

• 3.0V to 3.6V operation voltage

• Block Structure

- 64 x 64Kword Erase Blocks

• Fast random / page mode access time

- 100/25 ns Read Access Time (page depth:8-word)

• 128-bit Protection Register

- 64-bit Unique Device Identifier

- 64-bit User Programmable OTP Cells

• 16-Word Write Buffer

- 14 us/word Effective Programming Time

• Enhanced Data Protection Features Absolute Protection with VPEN = GND

- Flexible Block Locking

- Block Erase/Program Lockout during Power Transitions

Performance

• Low power dissipation

- typical 15mA active current for page mode read

- 80uA/(max.) standby current

• High Performance

- Block erase time: 2s typ.

- Word programming time: 210us typ.

- Block programming time: 0.8s typ. (using Write to Buffer Command)

• Program/Erase Endurance cycles: 100 cycles

Software Feature

• Support Common Flash Interface (CFI)

- MTP device parameters stored on the device and provide the host system to access.

Hardware Feature

• ACC pin

- 12V VPP for fast program/erase mode.

• VPEN pin

- For Erase /Program/ Block Lock enable.

• VCCQ Pin

- The output buffer power supply, control the device s output voltage.

• RESET pin

- Hardware reset

Packaging

- 48-Lead TSOP

Technology

- Two bits per cell Nbit (0.25u) MTP Technology