General Description

The MAX4358 is a 32 ✕ 16 highly integrated video crosspoint switch matrix with input and output buffers and On-Screen Display (OSD) Insertion. This device operates from dual ±3V to ±5V supplies or from a single +5V supply. Digital logic is supplied from an independent single +2.7V to +5.5V supply. Individual outputs can be switched between an input video signal source and OSD information through an internal, dedicated fast 2:1 mux (40ns switching times) located before the output buffer. All inputs and outputs are buffered, with all outputs able to drive standard 75Ω reverse-terminated video loads.

The switch matrix configuration and output buffer gain are programmed through an SPI/QSPI™-compatible, three-wire serial interface and initialized with a single update signal. The unique serial interface operates in two modes facilitating both fast updates and initialization. On power-up, all outputs are initialized in the disabled state to avoid output conflicts in large-array configurations.

Superior flexibility, high integration, and space-saving packaging make this nonblocking switch matrix ideal for routing video signals in security and video-on-demand systems.

The MAX4358 is available in a 144-pin TQFP package

and specified over an extended -40°C to +85°C temperature range. The MAX4358 evaluation kit is available to speed designs.

Features

♦ 32 ✕ 16 Nonblocking Matrix with Buffered Inputs and Outputs

♦ Operates from a ±3V, ±5V, or +5V Supply

♦ Fast Switching (40ns) 2:1 OSD Insertion Mux

♦ Each Output Individually Addressable

♦ Individually Programmable Output Buffer Gain

   (AV = +1V/V or +2V/V)

♦ High-Impedance Output Disable for Wired-OR Connections

♦ 0.1dB Gain Flatness to 12MHz

♦ Minimum -62dB Crosstalk, -110dB Isolation at 6MHz

♦ 0.05/0.1° Differential Gain/Differential Phase Error

♦ Low 195mW Power Consumption (0.38mW per point)

Applications

   Security Systems

   Video Routing

   Video-On-Demand Systems