DESCRIPTION

The DS1602 is a real-time clock/elapsed time counter designed to count seconds when VCC power is applied and continually count seconds under battery backup power with an additional counter regardless of the condition of VCC. The continuous counter can be used to derive time of day, week, month, and year by using a software algorithm. The VCC powered counter will automatically record the amount of time that VCC power is applied. This function is particularly useful in determining the operational time of equipment in which the DS1602 is used. Alternatively, this counter can also be used under software control to record real-time events. Communication to and from the DS1602 takes place via a 3-wire serial port. A 1-byte protocol selects read/ write functions, counter clear functions and oscillator trim. A low cost 32.768kHz crystal attaches directly to the X1 and X2 pins. If battery powered-only operation is desired, the VBAT pin must be grounded and the VCC pin must be connected to the battery.

FEATURES

■ Two 32-bit counters keep track of real-time and elapsed time

■ Counters keep track of seconds for over 125 years

■ Battery powered counter counts seconds from

   the time battery is attached until VBAT is less than 2.5V

■ VCC powered counter counts seconds while

   VCC is above VTP and retains the count in the

   absence of VCC under battery backup power

■ Clear function resets selected counter to 0

■ Read/write serial port affords low pin count

■ Maximum current drain of less than 1 µA from VBAT pin when serial port is disabled

■ One byte protocol defines read/write, counter address and software clear function

■ 8-pin DIP or optional 8-pin SOIC

■ Operating temperature range of -40°C to +85°C

■ Reduced performance operation down to VCC = 2.5V

■ Underwriters Laboratory (UL) recognized