Octal Transparent Latch with 3-STATE Outputs

General Description The 74F373 consists of eight latches with 3-STATE outputs for bus organized system applications. The flip-flops appear transparent to the data when Latch Enable (LE) is HIGH. When LE is LOW, the data that meets the setup times is latched. Data appears on the bus when the Outpu

Low Voltage Buffer/Line Driver with 5V Tolerant Inputs and Outputs with 26ohm Series Resistors in the Outputs

General Description The LCX2244 contains eight non-inverting buffers with 3-STATE outputs. The device may be employed as a memory address driver, clock driver and bus-oriented transmitter/receiver. The LCX2244 is designed for low voltage (2.5V or 3.3V) VCC applications with capability of interfac

Octal Bi-Directional Transceiver with 3-STATE Outputs

General Description The ABT245 contains eight non-inverting bidirectional buffers with 3-STATE outputs and is intended for bus-oriented applications. Current sinking capability is 64 mA on both the A and B ports. Features ■Bidirectional non-inverting buffers ■A and B output sink capa

Octal Transparent Latch with 3-STATE Outputs

General Description The AC/ACT373 consists of eight latches with 3-STATE outputs for bus organized system applications. The flip-flops appear transparent to the data when Latch Enable (LE) is HIGH. When LE is LOW, the data that meets the setup time is latched. Data appears on the bus when the Out

8-Bit Identity Comparator

General Description The 74F521 is an expandable 8-bit comparator. It compares two words of up to eight bits each and provides a LOW output when the two words match bit for bit. The expansion input IA=B also serves as an active LOW enable input. Features ■ Compares two 8-bit words in 6.5 ns typ

Low Voltage Octal D-Type Flip-Flop with 5V Tolerant Inputs and Outputs

General Description The LCX574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The information presented to the D inputs is stored in the flip-flops on the LOW-to-HIGH Clock (CP) transition. The LCX574 is functionally identic

Octal Bi-Directional Transceiver with 3-STATE Outputs

20-Lead Shrink Small Outline Package (SSOP), EIAJ TYPE II, 5.3mm Wide Package Number MSA20

文件：12.41 Kbytes Page：1 Pages

IEEE 1284 Transceiver

文件：265.88 Kbytes Page：7 Pages

Octal Buffers/Line Drivers with 3-STATE Outputs

文件：82.19 Kbytes Page：8 Pages

Octal D-Type Flip-Flop with 3-STATE Outputs

文件：80.59 Kbytes Page：8 Pages

Low Voltage Octal D-Type Flip-Flop with 5V Tolerant Inputs and Outputs

文件：765.18 Kbytes Page：14 Pages

Low Voltage Bidirectional Transceiver with 5V Tolerant Inputs and Outputs and 26ohm Series Resistors on Both A and B Ports

文件：121.42 Kbytes Page：10 Pages