Cascadable Silicon Bipolar MMIC Amplifier

Description The MSA-1000 is a high performance, medium power silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) chip. This MMIC is designed for use in a push-pull configuration in a 25 Ω system. The MSA-1000 can also be used as single-ended amplifier in a 50␣ Ω system with slightly re

Cascadable Silicon Bipolar MMIC Amplifier

Description The MSA-1000 is a high performance, medium power silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) chip. This MMIC is designed for use in a push-pull configuration in a 25 Ω system. The MSA-1000 can also be used as single-ended amplifier in a 50␣ Ω system with slightly re

Cascadable Silicon Bipolar MMIC Amplifier

Description\nThe MSA-1000 is a high performance, medium power silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) chip. This MMIC is designed for use in a push-pull configuration in a 25 Ω system. The MSA-1000 can also be used as single-ended amplifier in a 50␣ Ω system with slightly redu • High Output Power:\n   +27 dBm Typical P1dB at 1.0 GHz\n• Low Distortion:\n   37 dBm Typical IP3 at 1.0 GHz\n• 8.5 dB Typical Gain at 1.0 GHz\n• Impedance Matched to 25 Ω for Push-Pull Configurations;

SUPERFAST RECOVERY RECTIFIERS(VOLTAGE: 50 to 400 Volts CURRENT: 10.0 Amperes)

VOLTAGE 50 to 600 Volts CURRENT 10 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O. Flame Retardant Epoxy Molding Compound. • Exceeds environmental standards of MIL-S-19500/228 • Low power loss, high efficiency. • Low forwrd voltge, hig

SUPERFAST RECOVERY RECTIFIERS(VOLTAGE: 50 to 400 Volts CURRENT: 10.0 Amperes)

VOLTAGE 50 to 600 Volts CURRENT 10 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O. Flame Retardant Epoxy Molding Compound. • Exceeds environmental standards of MIL-S-19500/228 • Low power loss, high efficiency. • Low forwrd voltge, hig

Silicon planar type

Silicon planar type For stabilization of power supply ■ Features • High reliability, achieved by the combination the planar type and the glass seal • Large power dissipation: PD = 500 mW (With a printed-circuit board) • Wide voltage range: VZ = 2.0 V to 39 V • Easy-to-use because of the fine

Medium-Power Complementary Silicon Transistors

Medium-Power Complementary Silicon Transistors . . . for use as output devices in complementary general purpose amplifier applications. • High DC Current Gain — hFE = 6000 (Typ) @ IC = 3.0 Adc • Monolithic Construction with Built–in Base–Emitter Shunt Resistors

MICROMACHINED ACCELEROMETER

The XMMA series of silicon capacitive, micromachined accelerometers features; signal conditioning, a 4–pole low pass filter and temperature compensation. Zero–g offset full scale span and filter cut–off are factory set and require no external devices. A full system self–test capability verifies sy