Dynamic Switch PLL Clock Driver

Dynamic Switch PLL Clock Driver The MPC993 is a PLL clock driver designed specifically for redundant clock tree designs. The device receives two differential LVPECL clock signals from which it generates 5 new differential LVPECL clock outputs. Two of the output pairs regenerate the input signals

Dynamic Switch PLL Clock Driver

Liquid Crystal Clock Module

Liquid Crystal Clock Module

Region 1 MF Tone Generator

Description The M-993 is a monolithic CMOS integrated circuit designed to generate multifrequency (MF) tone pairs for use in trunk signaling. The tones generated conform to CCITT R1 signal recommendations and to AT&T MF standards. The M-993 permits design engineers to implement a highly accur

Micropower, Low-Voltage, SOT23, Rail-to-Rail I/O Comparators

General Description The MAX985/MAX986/MAX989/MAX990/MAX993/MAX994 single/dual/quad micropower comparators feature low-voltage operation and rail-to-rail inputs and outputs. Their operating voltages range from 2.5V to 5.5V, making them ideal for both 3V and 5V systems. These comparators also ope

Micropower, Low-Voltage, SOT23, Rail-to-Rail I/O Comparators

General Description The MAX985/MAX986/MAX989/MAX990/MAX993/MAX994 single/dual/quad micropower comparators feature low-voltage operation and rail-to-rail inputs and outputs. Their operating voltages range from 2.5V to 5.5V, making them ideal for both 3V and 5V systems. These comparators also ope