丝印代码：MP8049S；Quad Channel Power Half-Bridge

DESCRIPTION The MP8049S is a configurable dual channel full-bridge or quad channel half-bridge that can be configured as the output stage of a Class-D audio amplifier. Each full-bridge can be driven independently as stereo single ended audio amplifiers or driven complementary in a bridge ti

Quad Channel Power Half-Bridge

DESCRIPTION The MP8049S is a configurable dual channel full-bridge or quad channel half-bridge that can be configured as the output stage of a Class-D audio amplifier. Each full-bridge can be driven independently as stereo single ended audio amplifiers or driven complementary in a bridge ti

26V, 5.5A, 双通道全桥驱动器

MP8049S是一款可配置双通道全桥或四通道半桥驱动器，可配置为D类音频放大器的输出级。每个全桥都可作为立体声单端音频放大器独立驱动，也可在桥接负载（BTL）音频放大器配置中互补驱动。MP8049S具有低电流关断模式、待机模式、输入欠压保护、限流保护、过温关断保护和故障标记信号输出功能。所有驱动器通道都具有标准逻辑信号接口。MP8049S采用40引脚 QFN 5X5封装。 • 5V 至 26V VDD\n• ±5.5A 峰值电流输出\n• 高达 1MHz 开关频率\n• 受保护的0.14Ω集成功率开关管\n• 10ns开关管死区时间\n• 所有开关管限流保护\n• 内部欠压保护\n• 内部过温保护\n• 短路保护\n• 故障输出标记功能\n• 桥接负载输出功率：24V, 8Ω 条件下，37W/通道;

24V, 5.5A Quad Channel Power Half-Bridge

文件：603.06 Kbytes Page：12 Pages

Quad Channel Power Half-Bridge

DESCRIPTION The MP8049S is a configurable dual channel full-bridge or quad channel half-bridge that can be configured as the output stage of a Class-D audio amplifier. Each full-bridge can be driven independently as stereo single ended audio amplifiers or driven complementary in a bridge ti

24V 5.5A Quad Channel Power Half-Bridge Evaluation Board

文件：232.37 Kbytes Page：6 Pages

24V, 5.5A Quad Channel Power Half-Bridge

文件：603.06 Kbytes Page：12 Pages

HMOS SINGLE-COMPONENT 8-BIT MICROCONTROLLER

HMOS SINGLE-COMPONENT 8-BIT MICROCONTROLLER

1.8-volt 3-channel step-up, step-down, and polarity inverting DC-DC converter control IC

■Overview The AN8049SH is a three-channel PWM DC-DC converter control IC that features low-voltage operation. This IC can form a power supply that provides two step up outputs and one step-down or polarity inverted output with a minimal number of external components. The AN8049SH features t

1.8-volt 3-channel step-up, step-down, and polarity inverting DC-DC converter control IC

■Overview The AN8049SH is a three-channel PWM DC-DC converter control IC that features low-voltage operation. This IC can form a power supply that provides two step up outputs and one step-down or polarity inverted output with a minimal number of external components. The AN8049SH features t

1.8-volt 3-channel step-up, step-down, and polarity inverting DC-DC converter control IC

文件：170.6 Kbytes Page：23 Pages

1.8-volt 3-channel step-up, step-down, and polarity inverting DC-DC converter control IC

文件：170.6 Kbytes Page：23 Pages