20W Stereo Class D Single Ended Audio Amplifier

GENERAL DESCRIPTION The EV0030 is the evaluation board for the MP7720, a mono 20W Class D Audio Amplifier. It is one of MPS’ second generation of fully integrated audio amplifiers which dramatically reduces solution size by integrating the following: 180mΩ power MOSFETs Startup / Shutdo

Mini 20W Stereo Class D Single Ended Audio Amplifier

General Description The EV0066 is a 20W stereo evaluation board featuring MPS’ MP7720 Class D Single Ended Audio Amplifier. The EV0066 can deliver 20W into a 4Ω load with a 24V input supply. Features ■ 20W Output at 24V Input Into a 4Ω Load ■ 0.05 THD+N @ 2W, 1KHz Into 4Ω Load ■ 0.05 THD+N @

20W Class D Mono Single Ended Audio Amplifer

DESCRIPTION The MP7720 is a mono 20W Class D Audio Amplifier. It is one of MPS’ second generation of fully integrated audio amplifiers which dramatically reduces solution size by integrating the following: 180mΩ power MOSFETs Startup / Shutdown pop elimination Short circuit protect

20W Stereo Class D Single Ended Audio Amplifier Evaluation Board

文件：403.61 Kbytes Page：7 Pages

150W Class D 5.1 Channel Audio Board

文件：628.56 Kbytes Page：11 Pages

CMOS Sigma-Delta Modulator

GENERAL DESCRIPTION This device is a 7th order sigma-delta modulator that converts the analog input signal into a high speed 1-bit data stream. The part operates from a +5 V supply and accepts a differential input range of 0 V to +2.5 V or ±1.25 V centered about a commonmode bias. The analog inpu

CMOS Sigma-Delta Modulator

GENERAL DESCRIPTION This device is a 7th order sigma-delta modulator that converts the analog input signal into a high speed 1-bit data stream. The part operates from a +5 V supply and accepts a differential input range of 0 V to +2.5 V or ±1.25 V centered about a commonmode bias. The analog inpu

Low-dropout three-pin voltage regulator 1.2-A type

■Overview The AN7700, AN7700F, and AN7700SP series are stabilized constant-voltage power supplies with small difference between I/O voltages (0.5 V typ.). They are suitable for low-voltage, battery-driven equipment, and home appliances and industrial equipment with great fluctuation of the s

POWER ZENERS

DESCRIPTION Fused-in-glass, metallurgically bonded 6 watt leaded zeners and 10 watt stud-type- zeners. FEATURES ● High Surge Rating ● Small Physical Size ● Leaded and Stud Packages Available

17 AMP 12V INPUT ?쏝IG-HAMMER II??PROGRAMMABLE ISR

文件：200.03 Kbytes Page：4 Pages