TOSHIBA POWER MODULE

Coming Soon. If you have some information on related parts, please share useful information by adding links below.

TOSHIBA POWER MODULE

6 LED Pen Light

Features • Torch size is 6″ (15.5cm) × .6″ (1.5cm) × 1.3″ (3.4cm) • Requires 3 × AAA batteries (not included) • Weight Black and green colour plastic material torch Luminous output of 50lm 1.05oz (29.8g) Description Pen Light, 6 LEDs, 50lm

Copper Foil Tapes with Conductive Adhesive

Description This is coated with an acrylic adhesive which is uniformly dispersed with conductive spheres to provide a very low rate of electrical resistance through the tape. Applications • This Copper Foil Tape is typically used as an EMI/RFI shielding tape for applications in the electronic

Copper Foil Tapes with Conductive Adhesive

Description This is coated with an acrylic adhesive which is uniformly dispersed with conductive spheres to provide a very low rate of electrical resistance through the tape. Applications • This Copper Foil Tape is typically used as an EMI/RFI shielding tape for applications in the electronic

Copper Foil Tapes with Conductive Adhesive

Description This is coated with an acrylic adhesive which is uniformly dispersed with conductive spheres to provide a very low rate of electrical resistance through the tape. Applications • This Copper Foil Tape is typically used as an EMI/RFI shielding tape for applications in the electronic

Copper Foil Tapes with Conductive Adhesive

Description This is coated with an acrylic adhesive which is uniformly dispersed with conductive spheres to provide a very low rate of electrical resistance through the tape. Applications • This Copper Foil Tape is typically used as an EMI/RFI shielding tape for applications in the electronic

1.8GHz THREE GAIN LEVEL LNA

DESCRIPTION The STB7002 is a Silicon monolithic amplifier, that offers low noise figure and three gain levels for 1.8GHz applications. STB7002 is housed in a small industry-standard MSOP8-EP surface mount package, requiring very little board space (50 reduction vs SO8 Package). MSOP8-EP dimensi

Integrated Circuit Switched Mode Power Supply Control

Description: The NTE7002 is a bipolar integrated circuit in a 9–Lead SIP type package that drives, regulates, and monitors the switching transistor in a power supply based on the ringing choke flyback principle. Due to the wide regulating range and the high voltage stability during large loa

1.8GHz THREE GAIN LEVEL LNA

DESCRIPTION The STB7002 is a Silicon monolithic amplifier, that offers low noise figure and three gain levels for 1.8GHz applications. STB7002 is housed in a small industry-standard MSOP8-EP surface mount package, requiring very little board space (50 reduction vs SO8 Package). MSOP8-EP dimensi

LOW VOLTAGE C-MOS OPERATIONAL AMPLIFIER

文件：182.86 Kbytes Page：6 Pages

LOW VOLTAGE C-MOS OPERATIONAL AMPLIFIER

文件：182.86 Kbytes Page：6 Pages