丝印代码：MP5981；16V, 50A, 1.1mΩ RDS(ON),Hot-Swap Intelli-Fuse Solution

DESCRIPTION The MP5981 is a monolithic, integrated controller and switch that contains a high-side MOSFET and other circuitries that enable it to work in standalone operation or to be controlled by a hot-swap controller. The MP5981 drives up to 50A of continuous current per device at room t

丝印代码：MP5981；16V, 50A, 1.1mΩ RDS(ON),Hot-Swap Intelli-Fuse Solution

DESCRIPTION The MP5981 is a monolithic, integrated controller and switch that contains a high-side MOSFET and other circuitries that enable it to work in standalone operation or to be controlled by a hot-swap controller. The MP5981 drives up to 50A of continuous current per device at room t

16V, 50A, 1.1mΩ RDS(ON),Hot-Swap Intelli-Fuse Solution

DESCRIPTION The MP5981 is a monolithic, integrated controller and switch that contains a high-side MOSFET and other circuitries that enable it to work in standalone operation or to be controlled by a hot-swap controller. The MP5981 drives up to 50A of continuous current per device at room t

16V、50A、1.1mΩ 导通阻抗，热插拔 Intelli-Fuse 解决方案

MP5981 是一款集成型单片控制器和开关，它集成了上管功率 MOSFET (HS-FET) 以及其他电路，可单独运行或通过热插拔控制器进行控制。该器件在室温下每器件可驱动高达 50A 的连续输出电流 (IOUT )，在气流条件下可实现高达 60A 的连续输出电流。\n\n 当电路卡插入带电背板电源时，该器件可限制负载上的浪涌电流，从而限制背板压降。它通过限流参考输入和软启动斜坡来控制栅极电压，从而限制内部 MOSFET 电流。\n\n MP5981 具有多种可简化系统设计的功能，例如它采用集成电流镜来监测IOUT 和芯片温度，无需外部电流采样功率电阻器、功率 MOSFET • 4V 至 16V 工作输入电压 (VIN) 范围\n• 高达 50A 的输出电流 (IOUT)\n• 气流条件下可提供高达 60A 的 IOUT\n• 1mΩ RDS(ON) 集成功率 MOSFET\n• 内置 MOSFET 驱动器\n• 3V LDO 输出\n• 带采样输出的集成电流采样\n• 单独的电流采样输出用于配置过流 (OC) 值\n• 内置插入延迟\n• 可调软启动 (SS)\n• 输出短路保护 (SCP)\n• 过温保护 (OTP)\n• 内置熔丝健康报告\n• 故障信号输出\n• 支持并联运行以适应大电流应用\n• 集成 Intelli-Fuse 温度采样\n• 输出电压 ;

1A step-down switching regulator

Description The L5981 is step down switching regulator with 1.5A current limited embedded power MOSFET, so it is able to deliver in excess of 1A DC current to the load depending on the application condition. The input voltage can range from 2.9V to 18V, while the output voltage can be set starti

1A step-down switching regulator

Description The L5981 is step down switching regulator with 1.5A current limited embedded power MOSFET, so it is able to deliver in excess of 1A DC current to the load depending on the application condition. The input voltage can range from 2.9V to 18V, while the output voltage can be set starti

1 A step-down switching regulator

文件：872.07 Kbytes Page：37 Pages

1 A step-down switching regulator

文件：872.07 Kbytes Page：37 Pages

Multi-element photodiodes for surface mounting

文件：124.96 Kbytes Page：2 Pages