16V, 15A, 3mΩ RDS_ON, Hot-Swap Protection Device with Current Monitoring

DESCRIPTION The MP5025C is a hot-swap protection device designed to protect circuitry on its output from transients on its input. The MP5025C also protects its input from unwanted shorts and transients coming from its output. During start-up, inrush current is limited by the slew rate at the out

16V、15A、3mΩ 导通阻抗带电流监控功能的热插拔保护器件

MP5025C 是一款热插拔保护器件，用于保护输出端电路不受输入端瞬态的影响。它也可以保护输入不受短路和输出瞬态影响。当器件启动时，通过输出端的电压上升斜率来限制浪涌电流。输出电压上升斜率由 SS 引脚上的外部电容控制。\n\n 通过采样 FET 拓扑结构来限制最大输出负载电流。限流值大小由 ISET 引脚与地之间连接的低功率电阻设置。由内部充电泵驱动功率器件的栅极，控制具有 3mΩ 极低导通电阻（RDS(ON)）的功率 FET 导通。MP5025C 还包含 IMON 功能，可通过设置 IMON 至地之间的电阻值，产生与功率器件电流成正比的电压。\n\n 全方位的保护特性包 • 4.5V 至 16V 工作输入电压（VIN）范围\n• 集成 3mΩ 功率 MOSFET\n• 可调限流功能\n• 输出电流测量\n• ±3% 电流监控精度（6A <  IOUT <15A）\n• 短路保护快速响应（<200ns）\n• PG 检测器和 FLTB 指示\n• VIN = 0 时，PG 置低\n• 输入-输出短路检测\n• 外部软启动（SS）功能\n• 可编程 LOADEN 消隐时间\n• 带迟滞的可配置过压锁定（OVLO）\n• 欠压锁定保护（UVLO）\n• 过温保护\n• 采用小尺寸 QFN-22（3mmx5mm）封装;

丝印代码：5025C；16V, 15A, 3mΩ RDS_ON, Hot-Swap Protection Device with Current Monitoring

DESCRIPTION The MP5025C is a hot-swap protection device designed to protect circuitry on its output from transients on its input. The MP5025C also protects its input from unwanted shorts and transients coming from its output. During start-up, inrush current is limited by the slew rate at the out

16V, 15A, 3mΩ RDS_ON, Hot-Swap Protection Device with Current Monitoring

DESCRIPTION The MP5025C is a hot-swap protection device designed to protect circuitry on its output from transients on its input. The MP5025C also protects its input from unwanted shorts and transients coming from its output. During start-up, inrush current is limited by the slew rate at the out

丝印代码：5025C；16V, 15A, 3mΩ RDS_ON, Hot-Swap Protection Device with Current Monitoring

DESCRIPTION The MP5025C is a hot-swap protection device designed to protect circuitry on its output from transients on its input. The MP5025C also protects its input from unwanted shorts and transients coming from its output. During start-up, inrush current is limited by the slew rate at the out

封装/外壳：22-PowerVFQFN 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：16V, 15A, 3M RDS(ON), HOT-SWAP P 集成电路（IC） 热插拔控制器

封装/外壳：22-PowerVFQFN 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：16V, 15A, 3M RDS(ON), HOT-SWAP P 集成电路（IC） 热插拔控制器

Zener Diode, 1/2 Watt 짹5 Tolerance

Features: ● Zener Voltage 2.4 to 200V ● DO35 Package

Alternistor Triacs?

General Description Teccor offers bidirectional alternistors with current ratings from 6 A to 40 A and voltages from 200 V to 1000 V as part of Teccors broad line of thyristors. Teccors alternistor is specifically designed for applications that switch highly inductive loads. A special chip offers

POSITIVE INPUT/NEGATIVE OUTPUT INTEGRATED SWITCHING REGULATOR

文件：141.1 Kbytes Page：6 Pages

POSITIVE INPUT/NEGATIVE OUTPUT INTEGRATED SWITCHING REGULATOR

文件：141.1 Kbytes Page：6 Pages

POSITIVE INPUT/NEGATIVE OUTPUT INTEGRATED SWITCHING REGULATOR

文件：141.1 Kbytes Page：6 Pages