32-Channel High Voltage Analog Switch

The MP4832 is a 32-channel high voltage single-pole single-throw, SPST, analog switch designed for medical ultrasound imaging applications. It is designed to multiplex the transmit and receive voltages to and from multiple piezoelectric transducers, PZTs. The output switches are controlled by a 32-b ●No High Voltage Supplies Required\n●32 Channels\n●Up to ±100 Analog Signals\n●14Ω Typical Switch Resistance\n●±2.0 Typical Switch Peak Current\n●Off-Isolation of -60dB at 5.0MHz\n●80MHz Clock Frequency;

32-Channel High Voltage Analog Switch

文件：189.59 Kbytes Page：2 Pages

集成输出泄放电阻的 32 通道高压模拟开关

MP4832A 是一款集成输出泄放电阻的 32 通道高压单刀单掷 SPST 模拟开关，设计用于医疗超声成像应用。它专门用于对往返于多路电压式转换器 PZT 的发射电压和接收电压进行多路复用。输出开关由后跟 32 位数据锁存器的 32 位串行移位寄存器控制。它提供了数据输出引脚 Dout，使多个器件可以级联在一起。\n\n这将有助于最大限度减少输入/输出 I/O 控制线路的数量。数据锁存器中的逻辑高电平将使相应的模拟开关导通，而逻辑低电平将使其关断。MP4832A 无需任何高压电源。仅需两个低压电源：3.3V 和 10V。模拟开关可阻断或传递高达 ±90V 的模拟电压，峰值电流高达 ±2.0A。 • 无需高压电源\n• 高达 ±90V 的模拟信号\n• ±2.0A 典型开关峰值电流\n• 集成输出泄放电阻\n• 采用 72 引脚 10x10mm QFN 封装;

32-Channel High Voltage Analog Switch With Output Bleed Resistors

文件：132.4 Kbytes Page：2 Pages

丝印代码：MPS；32-Channel High Voltage Analog Switch With Output Bleed Resistors

文件：132.4 Kbytes Page：2 Pages

丝印代码：TBD；32-Channel High Voltage Analog Switch

文件：189.59 Kbytes Page：2 Pages

LCD MODULE

MECHANICAL DATA

RTC Module With 32Kx8 NVSRAM

文件：678.61 Kbytes Page：18 Pages

Digitally Controlled Tone and Volume Circuit with Stereo Audio Power Amplifier, Microphone Preamp Stage and National 3D Sound

文件：688.53 Kbytes Page：22 Pages

Digitally Controlled Tone and Volume Circuit with Stereo Audio Power Amplifier, Microphone Preamp Stage and National 3D Sound

文件：688.53 Kbytes Page：22 Pages

Digitally Controlled Tone and Volume Circuit with Stereo Audio Power Amplifier, Microphone Preamp Stage and National 3D Sound

文件：688.53 Kbytes Page：22 Pages