4-ch, 80V Boost WLED Controller with I2C

The MP3385 is a step-up controller with 4 regulated current channels designed to drive WLED arrays for middle and large-size LCD panel backlighting applications. \nThe MP3385 uses peak current mode, PWM control architecture for system loop regulation. It drives an external MOSFET to boost up the out ●4-String, Max 300mA/String WLED Driver\n●4.5V to 33V Input Voltage Range\n●80V Abs. Rating for Each String \n●1.8% Current Matching Accuracy for Each String\n●Unused Channel Auto-Detection Function during Start-Up\n●100kHz-900kHz Programmable Switching Frequency \n●Multiple Dimming Modes Select;

集成 I2C 的 4 路、80V WLED 升压控制器

MP3385A 是一款集成 4 个调节电流通道的升压控制器，用于驱动大中型 LCD 面板背光应用的 WLED 阵列。MP3385A 使用峰值电流模式和 PWM 控制架构来实施系统环路调压。MP3385A 驱动外部 MOSFET，以从 4.5V 至 33V 输入电源升高输出电压。MP3385A 采用 I2C 数字接口来灵活设置操作和保护模式，包括调光模式、调光电流和调光比、OCP、OVP、LED 短路保护阈值和开关频率。为了便于应用使用和在板上调试，MP3385A 在启动期间自动检测和禁用未使用的 LED 字符串，以避免将输出充电到 OVP 阈值。MP3385A 在每个灯串之间可实现 1.8&# • 4 串、每串最大 300mA 的 WLED 控制器\n• 输入电压范围：4.5V - 33V\n• 每串 80V ABS 额定电压\n• 每串的电流匹配精度为 1.8%\n• 启动期间未用通道自动检测功能\n• 100kHz-900kHz 可编程开关频率\n• 可通过 I2C 接口选择多种调光模式\n• O 直接 PWM 调光模式\n• O 通过 I2C 实现内部固定 23kHz PWM 调光模式\n• O 通过输入脉冲实现模拟调光模式\n• O 通过 I2C 实现内部模拟调光模式\n• O 通过输入脉冲实现混合调光模式\n• O 通过 I2C 实现内部混合调光模式\n• 2

4-String, 80V Output, WLED Controller with I2C Interface

文件：688.27 Kbytes Page：25 Pages

丝印代码：MPS；4-String, 80V Output, WLED Controller with I2C Interface

文件：688.27 Kbytes Page：25 Pages

封装/外壳：20-VFQFN 裸露焊盘 包装：卷带（TR） 描述：IC LED DRVR CTRL PWM 300MA 20QFN 集成电路（IC） LED 驱动器

封装/外壳：20-TSSOP（0.173"，4.40mm 宽）裸露焊盘 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC LED DRVR CTRLR PWM 20TSSOP 集成电路（IC） LED 驱动器

4 String WLED Controller With I2C Interface Evaluation Board

文件：634.45 Kbytes Page：8 Pages

짹15kV ESD-Protected, 3.0V to 5.5V, Low-Power, up to 250kbps, True RS-232 Transceiver

General Description The MAX338/MAX339 are monolithic, CMOS analog multiplexers (muxes). The 8-channel MAX338 is designed to connect one of eight inputs to a common output by control of a 3-bit binary address. The dual, 4-channel MAX339 is designed to connect one of four inputs to a common output

짹15kV ESD-Protected, 3.0V to 5.5V, Low-Power, up to 250kbps, True RS-232 Transceiver

General Description The MAX338/MAX339 are monolithic, CMOS analog multiplexers (muxes). The 8-channel MAX338 is designed to connect one of eight inputs to a common output by control of a 3-bit binary address. The dual, 4-channel MAX339 is designed to connect one of four inputs to a common output

Telephone ring signal converter

Telephone ring signal converter The TCA3385 is a high efficiency telephone ring signal converter designed for use with TCA3386 (it can also be used stand-alone). These devices, together with a microprocessor, form the basis for a high-performance feautre telephone set. The circuit includes a swi

Telephone ring signal converter

Telephone ring signal converter The TCA3385 is a high efficiency telephone ring signal converter designed for use with TCA3386 (it can also be used stand-alone). These devices, together with a microprocessor, form the basis for a high-performance feautre telephone set. The circuit includes a swi

Telephone ring signal converter

Telephone ring signal converter The TCA3385 is a high efficiency telephone ring signal converter designed for use with TCA3386 (it can also be used stand-alone). These devices, together with a microprocessor, form the basis for a high-performance feautre telephone set. The circuit includes a swi