2A, 1- or 2- Cell Li-ion Battery Charger In 3mm x 3mm Package

DESCRIPTION The MP2615 is a high efficiency switch mode battery charger suitable for 1- or 2- cell lithiumion or lithium-Polymer applications. The MP2615 is capable of delivering 2A of charge current programmable via an accurate sense resistor over the entire input range. The MP2615 regulates th

2A、QFN 3mmx3mm 封装单节或双节锂离子(Li+)电池充电器

MP2615 是一款高效率开关型电池充电器，适用于单节或双节锂离子电池以及锂聚合物电池应用。在整个输入范围，MP2615 能够提供的最大充电电流为 2A，此电流可以通过一个精确的检测电阻进行调节。\n\nMP2615 采用两个控制环路分别控制充电电流和电池充满电压，以实现高精度的恒流充电（CC）和恒压充电（CV）。 \n\n恒定关断时间（COT）控制模式下电路工作占空比高达99%，这样即使在电池电压接近输入电压时，仍然可以保持相对较大的电流对电池进行充电。\n\n在每个充电周期内，监测电池温度和充电状态。提供两个状态指示引脚，指示电池充电状态和输入电源状态。MP2615 还具有(防止电 • 4.75V 至 18V 输入工作电压\n• 占空比高达 99%\n• 可编程充电电流高达 2A\n• 电池充满电压精度为 ±0.75%\n• 电池充满电压有4.1V/节 和 4.2V/节可选\n• 功率开关管全集成\n• 内部环路补偿\n• 无需外部反向阻断二极管\n• 耗尽电池的预充电功能\n• 充电状态指示\n• 可编程安全充电定时器\n• 过温保护\n• 逐周期过流保护\n• 电池温度监测和保护;

2A, 1- or 2- Cell Li-ion Battery Charger In 3mm x 3mm Package

文件：1.4669 Mbytes Page：21 Pages

丝印代码：MP2615GQ；2A, 1- or 2- Cell Li-ion Battery Charger In 3mm x 3mm Package

DESCRIPTION The MP2615 is a high efficiency switch mode battery charger suitable for 1- or 2- cell lithiumion or lithium-Polymer applications. The MP2615 is capable of delivering 2A of charge current programmable via an accurate sense resistor over the entire input range. The MP2615 regulates th

丝印代码：MP2615GQ；2A, 1- or 2- Cell Li-ion Battery Charger In 3mm x 3mm Package

DESCRIPTION The MP2615 is a high efficiency switch mode battery charger suitable for 1- or 2- cell lithiumion or lithium-Polymer applications. The MP2615 is capable of delivering 2A of charge current programmable via an accurate sense resistor over the entire input range. The MP2615 regulates th

2A, 1- or 2- Cell Li-ion Battery Charger In 3mm x 3mm Package

DESCRIPTION The MP2615 is a high efficiency switch mode battery charger suitable for 1- or 2- cell lithiumion or lithium-Polymer applications. The MP2615 is capable of delivering 2A of charge current programmable via an accurate sense resistor over the entire input range. The MP2615 regulates th

2A、3mmx3mm 封装单节锂离子电池充电器

MP2615B 是一款单节锂离子或锂聚合物电池单片式开关充电器，内置功率 MOSFET。在整个输入电压范围内，通过准确的采样电阻，提供最高 2A 可编程充电电流。\n\nMP2615B 采用两个控制环路分别控制充电电流和电池充满电压，以实现高精度的恒流充电（CC）和恒压充电（CV）。\n\n恒定关断时间（COT）控制模式下电路工作占空比高达 99%，这样即使在电池电压接近输入电压时，仍然可以保持相对较大的电流对电池进行充电。\n\n充电期间，始终监测电池温度和充电状态。提供两个状态监测输出引脚，用于显示电池的充电状态和输入电源状态。MP2615B 还具有（防止电池）反向放电的闭锁保护功 • 4.5V 至 18V 工作电压范围\n• 占空比高达 99%\n• 可编程充电电流高达 2A\n• 电池充满电压精度为 ±0.75%\n• 电池充满电压有 4.03V 和 3.99V 可选\n• 功率开关管全集成\n• 内部环路补偿\n• 无需外部反向阻断二极管\n• 耗尽电池的预充电功能\n• 充电状态指示\n• 可编程安全充电定时器\n• 过温关断保护\n• 逐周期过流保护\n• 电池温度监测和保护;

具有 25mohm Rsns 的 2.1A、单节或双节锂离子电池充电器 IC

MP2615C 是一款高效率开关模式电池充电器 IC，适用于单节或双节锂离子或锂聚合物电池应用。该器件可以在整个输入电压范围内提供通过准确电流采样电阻配置的 2.1A 充电电流。\n\n MP2615C 采用两个控制环路分别控制充电电流和电池充满电压，以实现高精度的恒流充电（CC）和恒压充电（CV）。\n\n 当电池电压接近输入电压时，恒定关断时间（COT）控制使该器件的工作占空比高达 99%。这样可以保持相对高的充电电流。\n\n 充电期间，始终监测电池温度和充电状态。提供两个状态监测输出引脚，用于显示电池的充电状态和输入电源状态。MP2615C 还具有 • 3.95V 至 18V 工作电压范围\n• 占空比高达 99%\n• 可编程充电电流高达 2.1A\n• 电池充满电压精度为 ±0.75%\n• 电池充满电压有4.1V/节 和 4.2V/节可选\n• 功率开关管全集成\n• 内部环路补偿\n• 耗尽电池的预充电功能\n• 充电状态指示\n• 可编程安全充电定时器\n• 过温关断保护\n• 逐周期过流保护\n• 电池温度监测和保护;

2.1A, 1-Cell or 2-Cell Li-Ion Battery Charger in (3mmx3mm) Package

DESCRIPTION The MP2615C is a high-efficiency, switch-mode battery charger suitable for single-cell or dualcell Li-ion or Li-polymer applications. The device is capable of delivering 2.1A of charge current, which can be configured via an accurate current-sense resistor across the entire inpu

丝印代码：BMR；2.1A, 1-Cell or 2-Cell Li-Ion Battery Charger in (3mmx3mm) Package

DESCRIPTION The MP2615C is a high-efficiency, switch-mode battery charger suitable for single-cell or dualcell Li-ion or Li-polymer applications. The device is capable of delivering 2.1A of charge current, which can be configured via an accurate current-sense resistor across the entire inpu

2A, 1- or 2- Cell Li-ion Battery Charger In 3mm x 3mm Package

DESCRIPTION The MP2615 is a high efficiency switch mode battery charger suitable for 1- or 2- cell lithiumion or lithium-Polymer applications. The MP2615 is capable of delivering 2A of charge current programmable via an accurate sense resistor over the entire input range. The MP2615 regulates th

2 A, 1- or 2- Cell Li-Ion Battery Charger in 3mm x 3mm Package

文件：1.76476 Mbytes Page：21 Pages

丝印代码：ANK；2 A, 1- or 2- Cell Li-Ion Battery Charger in 3mm x 3mm Package

文件：1.76476 Mbytes Page：21 Pages

封装/外壳：16-PowerVFQFN 包装：管件 描述：2 A, 1- OR 2- CELL LI-ION BATTER 集成电路（IC） 电池充电器

2A, 1 Cell Li-ion Battery Charger In 3mm x 3mm Package

文件：881.34 Kbytes Page：20 Pages

丝印代码：AJC；2A, 1 Cell Li-ion Battery Charger In 3mm x 3mm Package

文件：881.34 Kbytes Page：20 Pages

封装/外壳：16-PowerVFQFN 包装：管件 描述：2A, 1 CELL LI-ION BATTERY CHARGE 集成电路（IC） 电池充电器

丝印代码：AEG；2A, 1- or 2- Cell Li-ion Battery Charger In 3mm x 3mm Package

文件：1.4669 Mbytes Page：21 Pages

PLL frequency synthesizer for tuners

The BU2615 PLL frequency synthesizers work up through the FM band. Featuring low radiation noise, low power consumption, and highly sensitive built-in RF amps, they support an IF count function. Features 1) Built-in high-speed prescaler can divide 130MHzVCO. 2) Basic oscillation of 75kH

PLL frequency synthesizer for tuners

The BU2615 PLL frequency synthesizers work up through the FM band. Featuring low radiation noise, low power consumption, and highly sensitive built-in RF amps, they support an IF count function. Features 1) Built-in high-speed prescaler can divide 130MHzVCO. 2) Basic oscillation of 75kH

PLL frequency synthesizer for tuners

The BU2615 PLL frequency synthesizers work up through the FM band. Featuring low radiation noise, low power consumption, and highly sensitive built-in RF amps, they support an IF count function. Features 1) Built-in high-speed prescaler can divide 130MHzVCO. 2) Basic oscillation of 75kH

Analog Surround IC Featuring the AViSSTM 3D Surround Algorithm

Overview The LA2615 and LA2615M are sound field playback processing ICs for use in audio equipment, TVs, and PCs. These ICs allow equipment to easily reproduce a spatial realistic sound field from a stereo signal from a music, video, or other audio source. Features • Supports a wide o

2 x 6 W hi-fi audio power amplifier

GENERAL DESCRIPTION The TDA2615 is a dual power amplifier in a 9-lead plastic single-in-line (SIL9MPF) medium power package. It has been especially designed for mains fed applications, such as stereo radio and stereo TV. FEATURES • Requires very few external components • No switch-on