6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION)

DESCRIPTION\nThe MOC811X series consists of a Gallium Arsenide IRED coupled with an NPN phototransistor. The base of the transistor is not bonded to an external pin for improved noise immunityFEATURES\n• High isolation voltage\n   5300 VAC RMS—1 minute\n• High BVCEO minimum 70 Volts\n• Current trans • High isolation voltage\n   5300 VAC RMS—1 minute\n• High BVCEO minimum 70 Volts\n• Current transfer ratio in selected groups:\n   MOC8111: 20% min.\n   MOC8112: 50% min.\n   MOC8113: 100% min.\n• Maximum switching time in saturation specified\n• Underwriters Laboratory (UL) recognized ;

6-Pin DIP Optocoupler for Power Supply Applications (No Base Connection)

Description The MOC811XM series consists of a Gallium Arsenide IRED coupled with an NPN phototransistor. The base of the transistor is not bonded to an external pin for improved noise immunity. Features ■ High isolation voltage 7500 VAC Peak—1 second ■ High BVCEO minimum 70 Volts ■ Curren

6-Pin DIP Optocoupler for Power Supply Applications (No Base Connection)

Description The MOC811XM series consists of a Gallium Arsenide IRED coupled with an NPN phototransistor. The base of the transistor is not bonded to an external pin for improved noise immunity. Features ■ High isolation voltage 7500 VAC Peak—1 second ■ High BVCEO minimum 70 Volts ■ Curren

6-Pin DIP Optocoupler for Power Supply Applications (No Base Connection)

Description The MOC811XM series consists of a Gallium Arsenide IRED coupled with an NPN phototransistor. The base of the transistor is not bonded to an external pin for improved noise immunity. Features ■ High isolation voltage 7500 VAC Peak—1 second ■ High BVCEO minimum 70 Volts ■ Curren

6-Pin DIP Optocoupler for Power Supply Applications (No Base Connection)

Description The MOC811XM series consists of a Gallium Arsenide IRED coupled with an NPN phototransistor. The base of the transistor is not bonded to an external pin for improved noise immunity. Features ■ High isolation voltage 7500 VAC Peak—1 second ■ High BVCEO minimum 70 Volts ■ Curren

6-Pin DIP Optocoupler for Power Supply Applications

文件：254.42 Kbytes Page：9 Pages

6-Pin DIP Optocoupler for Power Supply Applications

文件：254.42 Kbytes Page：9 Pages

6-Pin DIP Optocoupler for Power Supply Applications

文件：254.42 Kbytes Page：9 Pages

6-Pin DIP Optocoupler for Power Supply Applications

文件：254.42 Kbytes Page：9 Pages

6-Pin DIP Optoisolators Transistor Output(No Base Connection)

6-Pin DIP Optoisolators Transistor Output(No Base Connection) The MOC8111, MOC8112 and MOC8113 devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor detector. The internal base–to–Pin 6 connection has been eliminated for improved n

PHOTOTRANSISTOR OPTOCOUPLERS

文件：434.69 Kbytes Page：5 Pages

260 MHz, 16 x 8 Buffered Video Crosspoint Switches

PRODUCT DESCRIPTION The AD8110 and AD8111 are high speed 16 × 8 video cross-point switch matrices. They offer a –3 dB signal bandwidth greater than 260 MHz, and channel switch times of less than 25 ns with 1 settling. With –78 dB of crosstalk and –97 dB isolation (@ 5 MHz), the AD8110/AD8111 are

8mm VTR Sensor Amplifier

Overview The LB8111V is equipped with built-in amplifiers for use with reel FG, drum FG and drum PG applications to make this IC most suitable for portable VCR (Video Cassette Recorder) applications. Features • Built-in 2-channel reed FG amplifier. • Built-in drum FG amplifier. • Built-i

8mm VTR Sensor Amplifier

Overview The LB8111V is equipped with built-in amplifiers for use with reel FG, drum FG and drum PG applications to make this IC most suitable for portable VCR (Video Cassette Recorder) applications. Features • Built-in 2-channel reed FG amplifier. • Built-in drum FG amplifier. • Built-i