Termination Insensitive Mixer, 1 MHz - 3.5 GHz

Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good

Termination Insensitive Mixer, 1 MHz - 3.5 GHz

Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good

Termination Insensitive Mixer, 1 MHz - 3.5 GHz

Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good

(non-RoHS) Termination Insensitive

The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match and also ·Intermodulation Ratio is Insensitive to Port Mismatches\n·MIL-STD-883 Screening Available\n·Lo Power: +24 dBm Max\n·Maximum Input Power: 350 mW Max @ 25°C, Derated to 85°C @ 3.2 mW/°C\n·Impedance: 50 Ohms Nominal\n·Isolation: 35 dB Typical Midband\n·VSWR: <2.0:1 Typical Midband;

Plastic Medium Power Silicon NPN Transistor

Plastic Medium Power Silicon NPN Transistor 1.5 AMPERE POWER TRANSISTORS NPN SILICON 45, 60, 80 VOLTS 20 WATTS . . . designedfor use as audio amplifiers and drivers utilizing complementary or quasi complementary circuits. • DC Current Gain — hFE= 40 (Min) @ IC= 0.15 Adc • BD 165, 169

Thyristor logic level

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristor in a plastic envelope, suitable for surface mounting, intended for use in general purpose switching and phase control applications. This device is intended to be interfaced directly to microcontrollers, logic integrated circuits and

Single Phase Bridge Rectifier 2.0 Amp

Features: • Ideal for Printed Circuit Board • Surge Overload Rating: 50A (Peak)

Precision Voltage Reference

文件：262.98 Kbytes Page：14 Pages

Precision Voltage Reference

文件：262.98 Kbytes Page：14 Pages