200kHz, 4關A, Rail-to-Rail I/O Op Amps with Shutdown

General Description The single MAX9910/MAX9911 and dual MAX9912/MAX9913 operational amplifiers (op amps) feature a maximized ratio of gain bandwidth (GBW) to supply current and are ideal for battery-powered applications such as portable instrumentation, portable medical equipment, and wirele

200kHz、4µA、满摆幅输入/输出运算放大器，带有关断

MAX9910/MAX9911单路运算放大器和MAX9912/MAX9913双路运算放大器具有最高增益带宽(GBW)/电源电流比，适用于便携式仪表、便携式医疗设备和无线手持设备等电池供电产品。这些CMOS运放具有1pA超低输入偏置电流，提供满电源摆幅输入及输出、低至4µA的电源电流，工作于1.8V至5.5V单电源。为进一步节省功耗，MAX9911/MAX9913提供低功耗关断模式，将电源电流降至1nA，并使放大器输出处于高阻状态。这些器件是单位增益稳定、200kHz GBW。\n\n MAX9910/MAX9911分别采用5引脚和6引脚SC70封装。MAX9912采用8引脚SOT23 • 200kHz GBW\n• 4µA超低电源电流 \n• 1.8V至5.5V单电源供电 \n• 1pA超低输入偏置电流 \n• 满摆幅输入及输出电压范围\n• 低至±200µV的输入失调电压 \n• 低至0.001µA的关断电流 \n• 关断期间高阻输出(MAX9911/MAX9913) \n• 单位增益稳定 \n• 采用微型SC70、SOT23或µMAX封装;

200kHz, 4關A, Rail-to-Rail I/O Op Amps with Shutdown

General Description The single MAX9910/MAX9911 and dual MAX9912/MAX9913 operational amplifiers (op amps) feature a maximized ratio of gain bandwidth (GBW) to supply current and are ideal for battery-powered applications such as portable instrumentation, portable medical equipment, and wirele

200kHz, 4關A, Rail-to-Rail I/O Op Amps with Shutdown

General Description The single MAX9910/MAX9911 and dual MAX9912/MAX9913 operational amplifiers (op amps) feature a maximized ratio of gain bandwidth (GBW) to supply current and are ideal for battery-powered applications such as portable instrumentation, portable medical equipment, and wirele

200kHz, 4uA, Rail-to-Rail I/O Op Amps with Shutdown

文件：508.47 Kbytes Page：17 Pages

200kHz, 4μA, Rail-to-Rail I/O Op Amps with Shutdown

文件：508.47 Kbytes Page：17 Pages

200kHz, 4μA, Rail-to-Rail I/O Op Amps with Shutdown

文件：508.47 Kbytes Page：17 Pages

Low Power 250 MSPS 10-Bit DAC 1.8 V CMOS Direct Digital Synthesizer

GENERAL DESCRIPTION The AD9913 is a complete direct digital synthesizer (DDS) designed to meet the stringent power consumption limits of portable, handheld, and battery-powered equipment. The AD9913 features a 10-bit digital-to-analog converter (DAC) operating up to 250 MSPS. The AD9913 uses adva

Dual MOSFET Bootstrapped Driver with Break-Before-Make

DESCRIPTION The Si9913 is a dual MOSFET high-speed driver with break-before-make. It is designed to operate in high frequency dc-dc switchmode power supplies. The high-side driver is bootstrapped to handle the high voltage slew rate associated with “floating” high-side gate drivers. Each driver i

Integrating optical system, image sensor and circuit

文件：420.75 Kbytes Page：4 Pages