2:1复用器和1:2解复用器，带有环回

MAX9396由一个2:1复用器和一个1:2解复用器以及环回电路组成。复用器部分(通道B)可接受两路差分信号输入，产生单路差分输出。解复用器部分(通道A)可接受单路差分输入，产生两路并联的差分输出。MAX9396的环回模式可将通道A的输入连接至通道B的输出，并将选定通道B的输入连接至通道A的输出。\n MAX9396的差分输入接受且CML/LVPECL电平，还可接受共模电压在+0.6V至(VCC - 0.05V)范围内的LVDS输入。差分输出为LVDS兼容，可驱动100Ω负载。\n 三个LVCMOS/LVTTL逻辑输入控制输入和输出之间的内部连接，其中一个用于通道B的复用器部分(BSEL)，其 \n• 1.25GHz工作时保证450mV (最小值)差分输出摆幅 \n• 差分输入端集成100Ω电阻 \n• 同步环回控制 \n• 2ps(RMS) (最大值)随机抖动 \n• 交流规范：保证150mV差分输入 \n• 信号输入可接受任何VCM = +0.6V至(VCC - 0.05V)的差分信号 \n• 时钟或高速数据采用LVDS输出 \n• 低电平输入失效保护检测 \n• +3.0V至+3.6V电源电压范围 \n• LVCMOS/LVTTL逻辑输入;

2:1 Multiplexer and 1:2 Demultiplexer with Loopback

文件：168.43 Kbytes Page：13 Pages

2:1 Multiplexer and 1:2 Demultiplexer with Loopback

文件：168.43 Kbytes Page：13 Pages

Analog/DVI Dual-Display Interface

GENERAL DESCRIPTION The AD9396 offers designers the flexibility of an analog interface and digital visual interface (DVI) receiver integrated on a single chip. Also included is support for high bandwidth digital content protection (HDCP). FEATURES Analog/DVI dual interface Supports hi

Analog/DVI Dual-Display Interface

GENERAL DESCRIPTION The AD9396 offers designers the flexibility of an analog interface and digital visual interface (DVI) receiver integrated on a single chip. Also included is support for high bandwidth digital content protection (HDCP). FEATURES Analog/DVI dual interface Supports hi

丝印代码：JP=**；I2C Interface PMIC with 6-Channel WLED Driver and 4-LDO

文件：376.65 Kbytes Page：17 Pages