1.2A, Current-Limited, High-Side P-Channel Switch with Thermal Shutdown

General Description The MAX893L smart, low-voltage, P-channel, MOSFET power switch is intended for high-side load-switching applications. This switch operates with inputs from +2.7V to +5.5V, making it ideal for both +3V and +5V systems. Internal current-limiting circuitry protects the input su

1.2A, Current-Limited, High-Side P-Channel Switch with Thermal Shutdown

WLED Charge Pump, RGB, OLED Boost, LDOs with ALC and CAI

General Description The MAX8930 integrates a charge pump for white LED display  backlighting  with  ambient light control  (ALC) feature.  The  high-efficiency,  adaptive-mode  1x/-0.5x charge  pump  drives  up  to  11  LEDs  (8  WLEDs  +  RGB LED)  with  constant  current  for  uniform  bright

WLED Charge Pump, RGB, OLED Boost, LDOs with ALC and CAI

General Description The MAX8930 integrates a charge pump for white LED display  backlighting  with  ambient light control  (ALC) feature.  The  high-efficiency,  adaptive-mode  1x/-0.5x charge  pump  drives  up  to  11  LEDs  (8  WLEDs  +  RGB LED)  with  constant  current  for  uniform  bright

Dual-Input Linear Chargers, Smart Power Selector with Advanced Battery Temperature Monitoring

General Description The MAX8934_ dual-input Li+/Li-Poly linear battery chargers with Smart Power SelectorK safely charge a single Li+/Li-Poly cell in accordance with JEITA recommendations. The MAX8934_monitors the battery temperature (TBATT) while charging, and automatically adjusts the fast

双输入线性充电器，具有智能电源选择器，提供高级电池温度监测

MAX8934_双输入Li+/Li聚合物线性电池充电器带有智能电源选择器(Smart Power Selector™)，按照JEITA的要求为单节Li+/Li聚合物电池安全充电。MAX8934_监测充电状态下的电池温度(TBATT)，并根据电池的温度变化自动调节快充电流以及充电终止电压。MAX8934_还监测电池放电条件下的温度，当电池过热时向系统提供报警标识(/OT)。器件支持两种安全充电过程(详细信息请参考完整数据资料中的图6)。LDO常备电源具有极低的IQ，为系统提供额外的3.3V电源。\n\n MAX8934_可以采用独立的USB或交流适配器输入供电*，也可以由单个输入连接两 • 带有智能电源选择器的Li+电池充电器，无需外部MOSFET \n• 按照JEITA要求监测电池温度、自动调节充电电流和充电终止电压\n• 放电期间电池过热报警指示/OT \n• 3.3V LDO常备电源具有极低的IQ\n• 公共或独立的USB、适配器输入\n• 自动切换适配器/USB/电池 \n• 峰值电流超出适配器额定范围时，可由电池支持负载供电\n• 16V (直流)和9V (USB)输入OVP\n• 40mΩ SYS至BATT开关导通电阻\n• 热调节避免过热\n• 4.35V或5.3V SYS调节电压\n• 1.5A (最大值) USB输入电流限制(MAX8934D);

Dual-Input Linear Chargers, Smart Power Selector with Advanced Battery Temperature Monitoring

General Description The MAX8934_ dual-input Li+/Li-Poly linear battery chargers with Smart Power SelectorK safely charge a single Li+/Li-Poly cell in accordance with JEITA recommendations. The MAX8934_monitors the battery temperature (TBATT) while charging, and automatically adjusts the fast

双输入线性充电器，具有智能电源选择器，提供高级电池温度监测

MAX8934_双输入Li+/Li聚合物线性电池充电器带有智能电源选择器(Smart Power Selector™)，按照JEITA的要求为单节Li+/Li聚合物电池安全充电。MAX8934_监测充电状态下的电池温度(TBATT)，并根据电池的温度变化自动调节快充电流以及充电终止电压。MAX8934_还监测电池放电条件下的温度，当电池过热时向系统提供报警标识(/OT)。器件支持两种安全充电过程(详细信息请参考完整数据资料中的图6)。LDO常备电源具有极低的IQ，为系统提供额外的3.3V电源。\n\n MAX8934_可以采用独立的USB或交流适配器输入供电*，也可以由单个输入连接两 • 带有智能电源选择器的Li+电池充电器，无需外部MOSFET \n• 放电期间电池过热报警指示/OT \n• 公共或独立的USB、适配器输入\n• 峰值电流超出适配器额定范围时，可由电池支持负载供电\n• 40mΩ SYS至BATT开关导通电阻\n• 4.35V或5.3V SYS调节电压\n• 1.5A (最大值) USB输入电流限制(MAX8934D);

Dual-Input Linear Chargers, Smart Power Selector with Advanced Battery Temperature Monitoring

General Description The MAX8934_ dual-input Li+/Li-Poly linear battery chargers with Smart Power SelectorK safely charge a single Li+/Li-Poly cell in accordance with JEITA recommendations. The MAX8934_monitors the battery temperature (TBATT) while charging, and automatically adjusts the fast

Dual-Input Linear Chargers, Smart Power Selector with Advanced Battery Temperature Monitoring

General Description The MAX8934_ dual-input Li+/Li-Poly linear battery chargers with Smart Power SelectorK safely charge a single Li+/Li-Poly cell in accordance with JEITA recommendations. The MAX8934_monitors the battery temperature (TBATT) while charging, and automatically adjusts the fast

Dual-Input Linear Chargers, Smart Power Selector with Advanced Battery Temperature Monitoring

General Description The MAX8934_ dual-input Li+/Li-Poly linear battery chargers with Smart Power SelectorK safely charge a single Li+/Li-Poly cell in accordance with JEITA recommendations. The MAX8934_monitors the battery temperature (TBATT) while charging, and automatically adjusts the fast

Dual-Input Linear Chargers, Smart Power Selector with Advanced Battery Temperature Monitoring

General Description The MAX8934_ dual-input Li+/Li-Poly linear battery chargers with Smart Power SelectorK safely charge a single Li+/Li-Poly cell in accordance with JEITA recommendations. The MAX8934_monitors the battery temperature (TBATT) while charging, and automatically adjusts the fast

Dual-Input Linear Chargers, Smart Power Selector with Advanced Battery Temperature Monitoring

General Description The MAX8934_ dual-input Li+/Li-Poly linear battery chargers with Smart Power SelectorK safely charge a single Li+/Li-Poly cell in accordance with JEITA recommendations. The MAX8934_monitors the battery temperature (TBATT) while charging, and automatically adjusts the fast

Dual-Input Linear Charger, Smart Power Selector with Advanced Battery Temperature Monitoring

General Description The MAX8934G dual-input Li+/Li-Poly linear battery charger with Smart Power SelectorK safely charges a single Li+/Li-Poly cell in accordance with JEITA* recommendations. The MAX8934G monitors the battery temperature (TBATT) while charging, and automatically adjusts the fast-

Dual-Input Linear Charger, Smart Power Selector with Advanced Battery Temperature Monitoring

General Description The MAX8934G dual-input Li+/Li-Poly linear battery charger with Smart Power SelectorK safely charges a single Li+/Li-Poly cell in accordance with JEITA* recommendations. The MAX8934G monitors the battery temperature (TBATT) while charging, and automatically adjusts the fast-

1.2A, Current-Limited, High-Side P-Channel Switch with Thermal Shutdown

General Description The MAX893L smart, low-voltage, P-channel, MOSFET power switch is intended for high-side load-switching applications. This switch operates with inputs from +2.7V to +5.5V, making it ideal for both +3V and +5V systems. Internal current-limiting circuitry protects the input su

1.2A, Current-Limited, High-Side P-Channel Switch with Thermal Shutdown

General Description The MAX893L smart, low-voltage, P-channel, MOSFET power switch is intended for high-side load-switching applications. This switch operates with inputs from +2.7V to +5.5V, making it ideal for both +3V and +5V systems. Internal current-limiting circuitry protects the input su

封装/外壳：49-WFBGA，WLBGA 包装：散装 描述：IC SUPERVISOR 集成电路（IC） 电源管理 - 专用

封装/外壳：49-WFBGA，WLBGA 包装：卷带（TR） 描述：IC LED DRV RGLTR PWM 49WLP 集成电路（IC） LED 驱动器

Fully Assembled and Tested

文件：499.79 Kbytes Page：15 Pages

Dual-Input Linear Chargers, Smart Power Selector

文件：1.34587 Mbytes Page：32 Pages

Dual-Input Linear Chargers, Smart Power Selector

文件：1.34587 Mbytes Page：32 Pages

Dual-Input Linear Chargers, Smart Power Selector

文件：1.34587 Mbytes Page：32 Pages

Fully Assembled and Tested

文件：499.79 Kbytes Page：15 Pages

Fully Assembled and Tested

文件：499.79 Kbytes Page：15 Pages

Fully Assembled and Tested

文件：499.79 Kbytes Page：15 Pages

Dual-Input Linear Chargers, Smart Power Selector

文件：1.34587 Mbytes Page：32 Pages

System Power Management for Mobile Handset

文件：3.07902 Mbytes Page：44 Pages

System Power Management for Mobile Handset Hardware Input Enable

文件：3.03084 Mbytes Page：43 Pages

System Power Management for Mobile Handset

文件：3.06523 Mbytes Page：44 Pages

System Power Management for Mobile Handset

文件：3.06523 Mbytes Page：44 Pages

System Power Management for Mobile Handset

文件：3.07902 Mbytes Page：44 Pages

System Power Management for Mobile Handset

文件：3.07902 Mbytes Page：44 Pages

System Power Management for Mobile Handset

文件：3.06523 Mbytes Page：44 Pages

System Power Management for Mobile Handset

文件：3.07902 Mbytes Page：44 Pages

System Power Management for Mobile Handset Hardware Input Enable

文件：3.03084 Mbytes Page：43 Pages

System Power Management for Mobile Handset

文件：3.07902 Mbytes Page：44 Pages

System Power Management for Mobile Handset Hardware Input Enable

文件：3.03084 Mbytes Page：43 Pages

1.3 GHz Prescaler for PLL?셲 in TV, CATV and SAT TV Tuners

文件：129.57 Kbytes Page：7 Pages

1.3 GHz Prescaler for PLL?셲 in TV, CATV and SAT TV Tuners

文件：129.57 Kbytes Page：7 Pages