视频信号调理器，带有AGC和后肩钳位

MAX7450/MAX7451/MAX7452作为完整的前端视频信号调节器，是为改善标准定义视频信号的质量设计的。这些器件重建视频输入的DC电平、纠正幅度误差达±6dB、检测故障条件、过滤带外噪声。MAX7450/MAX7451/MAX7452对需进一步通过矩阵开关或视频解码器(ADC)进行视频处理的信号质量进行优化。每一款器件都集成了输入视频钳位功能、自动增益控制(AGC)、同步丢失(LOS)检测器和带外噪声/低通滤波器。这些器件还包含可以由用户选择的缓冲器增益(0或+6dB)以及AGC禁止功能。\n MAX7450和MAX7451分别采用±5V或±3.3V的双电源供电，重建相对于GND的视 \n• 可调节的后沿钳位(MAX7452) \n• 带有LOS输出的输入故障检测 \n• 单电源供电：MAX7452 (+5V) \n• 输出缓冲器以0dB或+6dB增益驱动标准的150Ω视频负载 \n• MAX7450 (±5V) \n• 微小的8引脚SO封装;

Video-Signal Conditioners with AGC and Back-Porch Clamp

文件：254.5 Kbytes Page：9 Pages

Video-Signal Conditioners with AGC and Back-Porch Clamp

文件：254.5 Kbytes Page：9 Pages

封装/外壳：8-SOIC（0.154"，3.90mm 宽）裸露焊盘 功能：调节器 包装：卷带（TR） 描述：IC VIDEO CONDITIONER 8SOIC 集成电路（IC） 视频处理

封装/外壳：8-SOIC（0.154"，3.90mm 宽）裸露焊盘 功能：调节器 包装：卷带（TR） 描述：IC VIDEO CONDITIONER 8SOIC 集成电路（IC） 视频处理

Pseudo Differential, 1MSPS, 12- & 10-Bit ADCs in 8-lead SOT-23

GENERAL DESCRIPTION The AD7441/AD74511 are, respectively, 10-/12-bit high speed, low power, single-supply, successive approximation (SAR), analog-to-digital converters (ADCs) that feature a pseudo differential analog input. These parts operate from a single 2.7 V to 5.25 V power supply and achiev

Two-Channel, Noise Reduction Processor for 8-mm VCR PCM

Overview The LA7451M is a two-channel, noise reduction processor IC for 8-mm video recorder, pulse code modulation (PCM) circuits. The LA7451M incorporates two filters, on per channel, comprising emphasis circuits, weighting compensators, voltage-controlled amplifiers (VCA) and detectors. Filter

4x7W OR 2x22W CAR RADIO POWER AMPLIFIER PLUS TRIPLE POWER SUPPLY

HIGH OUTPUT POWER CAPABILITY: 4 x 9.5W OR 2 x 32W/4Ω MAX 4 x 8.5W OR 2 x 28W/4Ω EIAJ 4 x 7W OR 2 x 22W/4Ω @14.4V, 1KHz; 10 MINIMIZED EXTERNAL COUNT - NO NEED OF DECOUPLING CAPACITORS - NO NEED OF BOOTSTRAP CAPACITOR - NO NEED OF EXTERNAL COMPENSATION - INTE

AND-OR-INVERT GATES

文件：221.31 Kbytes Page：7 Pages

AND-OR-INVERT GATES

文件：221.31 Kbytes Page：7 Pages