16-Port I/O Expander with LED Intensity Control, Interrupt, and Hot-Insertion Protection

General Description The MAX7313 I2C-compatible serial interfaced peripheral provides microprocessors with 16 I/O ports. Each I/O port can be individually configured as either an open-drain current-sinking output rated at 50mA and 5.5V, or a logic input with transition detection. A 17th port can b

16端口输入/输出扩展器，带有LED亮度控制和中断，提供热插入保护

MAX7313是I²C兼容的串行接口外围设备，可为微处理器提供16个I/O端口。每个I/O端口可以单独配置为漏极开路输出，额定输出电流50mA/5.5V；也可以配置为具有瞬态检测的逻辑输入。第17个端口可用作瞬态检测中断或通用输出。输出端口可用于驱动LED或与外部上拉电阻配合提供高达5.5V的逻辑输出。\n\n 器件还集成了8位PWM电流控制，其中4位用于全局控制，对所有的LED输出提供电流粗调，从完全关闭到最亮状态，共有14个亮度级。此外，每个输出还具有各自的4位控制，可进一步将全局设置电流细分为16个等级。另外，电流控制也可配置成单独的8位控制，同时设置所有输出。\n\n • 400kbps、2线串行接口，5.5V容限\n• 8位PWM LED亮度控制\n• 独立的16级亮度控制\n• 两相LED闪烁\n• 输出额定电压5.5V，漏极开路\n• 5.5V输入过压保护\n• 1.2µA (典型值)、3.6µA (最大值)待机电流\n• -40°C至+125°C工作温度范围\n• 所有端口均可配置成输入或输出;

16-Port I/O Expander with LED Intensity Control, Interrupt, and Hot-Insertion Protection

文件：253.77 Kbytes Page：26 Pages

16-Port I/O Expander with LED Intensity Control, Interrupt, and Hot-Insertion Protection

General Description The MAX7313 I2C-compatible serial interfaced peripheral provides microprocessors with 16 I/O ports. Each I/O port can be individually configured as either an open-drain current-sinking output rated at 50mA and 5.5V, or a logic input with transition detection. A 17th port can b

16-Port I/O Expander with LED Intensity Control, Interrupt, and Hot-Insertion Protection

General Description The MAX7313 I2C-compatible serial interfaced peripheral provides microprocessors with 16 I/O ports. Each I/O port can be individually configured as either an open-drain current-sinking output rated at 50mA and 5.5V, or a logic input with transition detection. A 17th port can b

16-Port I/O Expander with LED Intensity Control, Interrupt, and Hot-Insertion Protection

文件：253.77 Kbytes Page：26 Pages

16-Port I/O Expander with LED Intensity Control, Interrupt, and Hot-Insertion Protection

文件：253.77 Kbytes Page：26 Pages

封装/外壳：24-SSOP（0.154"，3.90mm 宽） 包装：卷带（TR） 描述：IC I/O EXPANDER I2C 16B 24QSOP 集成电路（IC） I/O 扩展器

16-Port I/O Expander with LED Intensity Control, Interrupt, and Hot-Insertion Protection

文件：253.77 Kbytes Page：26 Pages

封装/外壳：24-WFQFN 裸露焊盘 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC I/O EXPANDER I2C 16B 24TQFN 集成电路（IC） I/O 扩展器

DIGITAL CONTROLLED STEREO AUDIO PROCESSOR WITH LOUDNESS

DESCRIPTION The TDA7313 is a volume, tone (bass and treble) balance (Left/Right) and fader (front/rear) processor for quality audio applications in car radio and Hi-Fi systems. Selectable input gain and external loudness function are provided. Control is accomplished by serial I2C busmicroproces

DIGITAL CONTROLLED STEREO AUDIO PROCESSOR WITH LOUDNESS

DESCRIPTION The TDA7313N is a volume, tone (bass and treble) balance (Left/Right) and fader (front/rear) processor for quality audio applications in car radio and Hi-Fi systems. Selectable input gain and external loudness function are provided. Control is accomplished by serial I2C busmicroproce

DIGITAL CONTROLLED STEREO AUDIO PROCESSOR WITH LOUDNESS

DESCRIPTION The TDA7313N is a volume, tone (bass and treble) balance (Left/Right) and fader (front/rear) processor for quality audio applications in car radio and Hi-Fi systems. Selectable input gain and external loudness function are provided. Control is accomplished by serial I2C busmicroproce

ANALOG FUNCTION SWITCH???

文件：193.94 Kbytes Page：5 Pages

ANALOG FUNCTION SWITCH???

文件：193.94 Kbytes Page：5 Pages