16-Port, 36V Constant-Current LED Driver

General Description The MAX6971 serial-interfaced LED driver provides 16 open-drain, constant-current-sinking LED driver outputs rated at 36V. The MAX6971 operates from a 3V to 5.5V supply. The MAX6971 supply and the LEDs’ supply or supplies can power up in any order. The constant-current outputs

8端口、36V恒流LED驱动器

MAX6970串行接口LED驱动器提供8个开漏、恒流吸收、额定36V的LED驱动器输出。器件工作在3V至5.5V电源下。MAX6970电源和LED电源能够以任意顺序上电。恒流输出均由一个外部电阻设置，每路最大55mA。MAX6970采用一个25Mbps、工业标准的4线串行接口。\n\n MAX6970采用工业标准的移位寄存器加锁存器形式的串行接口。数据通过数据输入DIN和时钟输入CLK移入驱动器的8位移位寄存器。8个时钟周期后，输入数据出现在输出DOUT上，此工作模式可实现多个MAX6970的级联。锁存使能输入LE将8位移位寄存器数据装入一个8位输出锁存器，以决定LED的开关。输出使 • 25Mbps工业标准、4线、5V串行接口\n• 3V至5.5V逻辑电源\n• 8个恒流、额定36V LED输出\n• 每路输出最大55mA的连续电流\n• 由一个电阻设置输出电流\n• 各输出之间3%的电流匹配\n• IC之间6%的电流匹配\n• -40°C至+125°C温度范围;

封装/外壳：16-SSOP（0.209"，5.30mm 宽） 包装：管件 描述：IC LED DRIVER LINEAR 55MA 16SSOP 集成电路（IC） LED 驱动器

封装/外壳：16-TSSOP（0.173"，4.40mm 宽）裸露焊盘 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC LED DRVR LINEAR 55MA 16TSSOP 集成电路（IC） LED 驱动器

2-phase motor driver for VCR cylinder motors

The BA6970FS is a direct-drive motor driver suitable for 2-phase, full-wave linear motors. The IC consists of a Hall amplifier control circuit, driver circuits, FG / PG signal amplifiers, and hysteresis amplifiers.
Features 1) Linear drive system provides low switching noise. 2) Output

2-phase motor driver for VCR cylinder motors

The BA6970FS is a direct-drive motor driver suitable for 2-phase, full-wave linear motors. The IC consists of a Hall amplifier control circuit, driver circuits, FG / PG signal amplifiers, and hysteresis amplifiers.
Features 1) Linear drive system provides low switching noise. 2) Output

20V Dual N-Channel MOSFET w/ESD Protected

文件：242.25 Kbytes Page：4 Pages

20V Dual N-Channel MOSFET w/ESD Protected

文件：242.25 Kbytes Page：4 Pages